First Light - Solar Spectrum 0.3A
- Montana
- Librarian
- Posts: 34563
- Joined: Mon Oct 17, 2011 5:25 pm
- Location: Cheshire, UK
- Has thanked: 17672 times
- Been thanked: 8793 times
First Light - Solar Spectrum 0.3A
Today dawned blue sky and I was out at 8am setting up. I had actually been woken up by Stuart as he emailed me at 7am thanks Stu It is so unusual but I had the Hubby's iPhone by my ear as I was using it as an alarm for 3am. I have been getting up at 3am for the last 4 nights to look for Noctilucent clouds but not seen any yet So at least this chime enabled me to get out early. I set up the Solar Spectrum and spent the next hour very perplexed, I couldn't achieve focus. I had the instruction manual out, checked the maths, changed things round, then put it all back together again. I then kind of gathered that the focuser tube for the TEC wasn't long enough, so I put a 50mm extension tube on the nose before the TZ4 and viola, focus, phew. What an hour!!
So down to the business. The SS has on the side it's set point being 27 degrees C so I set it for 22 degrees and took an image (no flat) every degree up till 29 degrees. I then went back down to 21 and went down to 19 degrees. Now I know why the Quark costs £1200 and this cost 5x more. But it isn't 5x better it is 100x better. I have control points of 0.1 degree, a beautiful flat field of view and 10x the contrast of the Quark. To move 1 degree in temperature it takes 60 seconds, one knob turn of the Quark takes 10 minutes. My oh my, what a delight this instrument is - once you have fathomed the maths that is
So photos
Solar Spectrum Solar Observer Series 1.5 25mm 0.3A H-Alpha Filter by Alexandra Hart, on Flickr
Solar Spectrum Solar Observer Series 1.5 25mm 0.3A H-Alpha Filter by Alexandra Hart, on Flickr
Solar Spectrum Solar Observer Series 1.5 25mm 0.3A H-Alpha Filter by Alexandra Hart, on Flickr
Solarspectrum Dial settings by Alexandra Hart, on Flickr
I settled on 23.5C as I couldn't make up my mind whether it is 23 or 24. But certainly not 27
Sun_094356_17_07_2021_f colour by Alexandra Hart, on Flickr
Sun_094356_17_07_2021 by Alexandra Hart, on Flickr
Sun_100105_17_07_2021_f colour by Alexandra Hart, on Flickr
Sun_100105_17_07_2021 by Alexandra Hart, on Flickr
Sun_095322_17_07_2021_f colour by Alexandra Hart, on Flickr
Sun_095322_17_07_2021 by Alexandra Hart, on Flickr
Sun_093442_17_07_2021 by Alexandra Hart, on Flickr
Sun_095952_17_07_2021 by Alexandra Hart, on Flickr
Sun_095503_17_07_2021 by Alexandra Hart, on Flickr
Sun_093142_17_07_2021 by Alexandra Hart, on Flickr
Sun_092348_17_07_2021_f colour by Alexandra Hart, on Flickr
Sun_092348_17_07_2021 by Alexandra Hart, on Flickr
Sun_092248_17_07_2021 by Alexandra Hart, on Flickr
Next job, fathom out the maths for the C11
Alexandra
So down to the business. The SS has on the side it's set point being 27 degrees C so I set it for 22 degrees and took an image (no flat) every degree up till 29 degrees. I then went back down to 21 and went down to 19 degrees. Now I know why the Quark costs £1200 and this cost 5x more. But it isn't 5x better it is 100x better. I have control points of 0.1 degree, a beautiful flat field of view and 10x the contrast of the Quark. To move 1 degree in temperature it takes 60 seconds, one knob turn of the Quark takes 10 minutes. My oh my, what a delight this instrument is - once you have fathomed the maths that is
So photos
Solar Spectrum Solar Observer Series 1.5 25mm 0.3A H-Alpha Filter by Alexandra Hart, on Flickr
Solar Spectrum Solar Observer Series 1.5 25mm 0.3A H-Alpha Filter by Alexandra Hart, on Flickr
Solar Spectrum Solar Observer Series 1.5 25mm 0.3A H-Alpha Filter by Alexandra Hart, on Flickr
Solarspectrum Dial settings by Alexandra Hart, on Flickr
I settled on 23.5C as I couldn't make up my mind whether it is 23 or 24. But certainly not 27
Sun_094356_17_07_2021_f colour by Alexandra Hart, on Flickr
Sun_094356_17_07_2021 by Alexandra Hart, on Flickr
Sun_100105_17_07_2021_f colour by Alexandra Hart, on Flickr
Sun_100105_17_07_2021 by Alexandra Hart, on Flickr
Sun_095322_17_07_2021_f colour by Alexandra Hart, on Flickr
Sun_095322_17_07_2021 by Alexandra Hart, on Flickr
Sun_093442_17_07_2021 by Alexandra Hart, on Flickr
Sun_095952_17_07_2021 by Alexandra Hart, on Flickr
Sun_095503_17_07_2021 by Alexandra Hart, on Flickr
Sun_093142_17_07_2021 by Alexandra Hart, on Flickr
Sun_092348_17_07_2021_f colour by Alexandra Hart, on Flickr
Sun_092348_17_07_2021 by Alexandra Hart, on Flickr
Sun_092248_17_07_2021 by Alexandra Hart, on Flickr
Next job, fathom out the maths for the C11
Alexandra
-
- Way More Fun to Share It!!
- Posts: 6871
- Joined: Mon May 18, 2020 4:45 pm
- Location: Essex, S.E.England
- Been thanked: 4900 times
Re: First Light - Solar Spectrum 0.3A
Very well done Alexandra on your 1st light of the Solar Spectrum 0.3A.
Also for that very early start to get these fabulous captures, certainly has been a very worthwhile exercise.
Absolutely excellent captures and especially the prominence capture in both colours...
At last the weather has allowed you to try-out this set-up, which looks quite impressive...
Thanks for sharing
Terry
Also for that very early start to get these fabulous captures, certainly has been a very worthwhile exercise.
Absolutely excellent captures and especially the prominence capture in both colours...
At last the weather has allowed you to try-out this set-up, which looks quite impressive...
Thanks for sharing
Terry
- Rusted
- Way More Fun to Share It!!
- Posts: 1738
- Joined: Fri Jan 19, 2018 11:00 am
- Location: Central Denmark
- Has thanked: 8016 times
- Been thanked: 1938 times
- Contact:
Re: First Light - Solar Spectrum 0.3A
Stop it Alexandra!
You are breaking my heart!
Congratulations on your new toy!!
It has gone to a very good home!
Now you can really put us all to shame!
Did I mention your latest mages are exquisite?
You are breaking my heart!
Congratulations on your new toy!!
It has gone to a very good home!
Now you can really put us all to shame!
Did I mention your latest mages are exquisite?
http://fullerscopes.blogspot.dk/
H-alpha: Baader 160mm D-ERF, iStar 150/10 H-alpha objective, 2" Baader 35nm H-a, 2" Beloptik KG3,
Lunt 60MT etalon, Lunt B1200S2 BF, Assorted T-S GPCs or 2x "Shorty" Barlow, ZWO ASI174.
H-alpha: Baader 160mm D-ERF, iStar 150/10 H-alpha objective, 2" Baader 35nm H-a, 2" Beloptik KG3,
Lunt 60MT etalon, Lunt B1200S2 BF, Assorted T-S GPCs or 2x "Shorty" Barlow, ZWO ASI174.
-
- Im an EXPERT!
- Posts: 395
- Joined: Mon May 04, 2020 2:21 pm
- Location: Moscow, Russia
- Has thanked: 1262 times
- Been thanked: 1057 times
- Contact:
Re: First Light - Solar Spectrum 0.3A
It's a top notch stuff, Alexandra!
Amaizing images from the 1st light, congratulations!
What about a forecast suitable to try it with C11?
regards
Leo
Amaizing images from the 1st light, congratulations!
What about a forecast suitable to try it with C11?
regards
Leo
- MAURITS
- Way More Fun to Share It!!
- Posts: 8507
- Joined: Tue Nov 27, 2018 4:37 pm
- Location: Belgium
- Has thanked: 2412 times
- Been thanked: 4787 times
- Contact:
Re: First Light - Solar Spectrum 0.3A
Wow Alexandra what a terrific instrument, sush wonderful images.
I can feel your enthusiasm and wish you a lot of great images and a lot of sunshine in the future.
I can feel your enthusiasm and wish you a lot of great images and a lot of sunshine in the future.
- Ivan
- Way More Fun to Share It!!
- Posts: 1849
- Joined: Thu Apr 08, 2021 11:50 pm
- Location: Russia, Yaroslavl
- Has thanked: 3465 times
- Been thanked: 2250 times
Re: First Light - Solar Spectrum 0.3A
Alexandra, congratulations !!! A stunning result, and in every sense not earthly beauty. Thanks for another master class.
Ivan
Ivan
- Petrus
- Almost There...
- Posts: 701
- Joined: Wed Feb 03, 2021 12:14 pm
- Location: Finland
- Has thanked: 1496 times
- Been thanked: 684 times
- Contact:
Re: First Light - Solar Spectrum 0.3A
Congratulations! What a spectacular solar images, Alexandra. Prominence picture is amazing!
~ Petrus ~
Flickr
https://www.flickr.com/people/194757663@N08/
LS80THa DSII - Calcium II K module 12mm - Lunt Herschel wedge 1.25" - Quark Chromosphere - Solarscout Quark - Sol'Ex
Flickr
https://www.flickr.com/people/194757663@N08/
LS80THa DSII - Calcium II K module 12mm - Lunt Herschel wedge 1.25" - Quark Chromosphere - Solarscout Quark - Sol'Ex
- arnedanielsen
- Way More Fun to Share It!!
- Posts: 7285
- Joined: Fri Apr 18, 2014 10:42 pm
- Location: Vestby, Norway
- Has thanked: 6181 times
- Been thanked: 7142 times
Re: First Light - Solar Spectrum 0.3A
Alexandra,
Congratulations on your new filter and some stunning pictures! Great work!
PS You need to raise your tripod... the long image-train is almost touching the ground :-)
Best regards,
Arne
Congratulations on your new filter and some stunning pictures! Great work!
PS You need to raise your tripod... the long image-train is almost touching the ground :-)
Best regards,
Arne
- ffellah
- Way More Fun to Share It!!
- Posts: 11172
- Joined: Mon Oct 27, 2014 6:46 pm
- Location: Westport, CT USA
- Has thanked: 9145 times
- Been thanked: 6026 times
Re: First Light - Solar Spectrum 0.3A
Alexandra: what a fantastic start with your new SS ! I know how much you wanted one and I am very happy you now can finally play with it. Your first images are top notch: can’t wait to see what you will get out of the C11… I hope to learn from you using mine. Love all your images, the prominences are already terrific.
Franco
Franco
- pedro
- Way More Fun to Share It!!
- Posts: 12256
- Joined: Sun May 01, 2016 8:26 pm
- Location: Portugal
- Has thanked: 14 times
- Been thanked: 6577 times
- Contact:
Re: First Light - Solar Spectrum 0.3A
FANTASTIC images Alexandra, the SS is working great, I want one...
Pedro Re'
https://pedroreastrophotography.com/
https://pedroreastrophotography.com/
- Carbon60
- Way More Fun to Share It!!
- Posts: 14209
- Joined: Wed Mar 07, 2012 12:33 pm
- Location: Lancashire, UK
- Has thanked: 8418 times
- Been thanked: 8165 times
Re: First Light - Solar Spectrum 0.3A
Excellent first light, Alexandra. My 250mm RCT images were diabolical from this morning. I hope you have better luck than I did with your C11 tomorrow.
Great to hear the SS is a delight to use and the results speak for themselves.
Stu.
Great to hear the SS is a delight to use and the results speak for themselves.
Stu.
H-alpha, WL and Ca II K imaging kit for various image scales.
Fluxgate Magnetometers (1s and 150s Cadence).
Radio meteor detector.
More images at http://www.flickr.com/photos/solarcarbon60/
Fluxgate Magnetometers (1s and 150s Cadence).
Radio meteor detector.
More images at http://www.flickr.com/photos/solarcarbon60/
- Geremia Forino
- Ohhhhhh My!
- Posts: 126
- Joined: Fri Mar 27, 2015 9:16 am
- Has thanked: 39 times
- Been thanked: 45 times
Re: First Light - Solar Spectrum 0.3A
Absolutely fantastic, Solar Spectrum 0.3A is my dream I need to collect money
- DeepSolar64
- Way More Fun to Share It!!
- Posts: 18829
- Joined: Thu Sep 05, 2019 12:19 am
- Location: Lowndesville S.C.
- Has thanked: 17581 times
- Been thanked: 16697 times
Re: First Light - Solar Spectrum 0.3A
Alexandra,
You have now the highest rated etalons in amateur solar astronomy. Solar Spectrum and Solarscope! Enjoy yourself!
James
You have now the highest rated etalons in amateur solar astronomy. Solar Spectrum and Solarscope! Enjoy yourself!
James
Lunt 8x32 SUNoculars
Orion 70mm Solar Telescope
Celestron AstroMaster Alt/Az Mount
Meade Coronado SolarMax II 60 DS
Meade Coronado SolarMax II 90 DS
Meade Coronado AZS Alt/Az Mount
Astro-Tech AT72EDII with Altair solar wedge
Celestron NexStar 102GT with Altair solar wedge
Losmandy AZ8 Alt/Az Mount
Sky-Watcher AZGTI Alt-Az GoTo mount
Cameras: ZWO ASI178MM, PGR Grasshopper, PGR Flea
Lunt, Coronado, TeleVue, Orion and Meade eyepieces
Visual Observer
" Way more fun to see it! "
Orion 70mm Solar Telescope
Celestron AstroMaster Alt/Az Mount
Meade Coronado SolarMax II 60 DS
Meade Coronado SolarMax II 90 DS
Meade Coronado AZS Alt/Az Mount
Astro-Tech AT72EDII with Altair solar wedge
Celestron NexStar 102GT with Altair solar wedge
Losmandy AZ8 Alt/Az Mount
Sky-Watcher AZGTI Alt-Az GoTo mount
Cameras: ZWO ASI178MM, PGR Grasshopper, PGR Flea
Lunt, Coronado, TeleVue, Orion and Meade eyepieces
Visual Observer
" Way more fun to see it! "
- Martin_S
- Way More Fun to Share It!!
- Posts: 1839
- Joined: Sat Mar 16, 2019 12:34 am
- Location: Brisbane , Australia
- Has thanked: 979 times
- Been thanked: 2992 times
Re: First Light - Solar Spectrum 0.3A
Wow , they are fantastic Alexandra
Martin
Martin
H alpha : ,Skywatcher 120mm F8 open frame refractor, a tilted 2" 7nm H-alpha filter as a sub energy rejection filter, Baader TZ4 telecentric focal extender, Player One energy rejection filter, Combo Quark Chromosphere, Naked PST etalon for double stacking, ASI74mm camera
- JochenM
- Way More Fun to Share It!!
- Posts: 2839
- Joined: Tue Dec 10, 2019 2:26 pm
- Location: Belgium
- Has thanked: 1200 times
- Been thanked: 1619 times
- Contact:
Re: First Light - Solar Spectrum 0.3A
Cracking shots, Alexandra.
Looks like that Solar Spectrum was worth every cent. Nice uniformity across the entire fov and beautiful detail/contrast.
Looks like that Solar Spectrum was worth every cent. Nice uniformity across the entire fov and beautiful detail/contrast.
- davidem27
- Ohhhhhh My!
- Posts: 148
- Joined: Mon May 10, 2021 10:06 am
- Location: Southern Italy
- Has thanked: 81 times
- Been thanked: 247 times
Re: First Light - Solar Spectrum 0.3A
And so....
you got a....
Solar Spectrum....
0.3 Angstrom?
You rock!!!
I was astonishing over this image.
It shows many phenomena to me.
I would like to understand them with all of you
I touched Alexandra's image, hope this not disturb you, Montana.
The reached resolution shows us very delicate and definited soft arches from a filament to another one.
That's amazing...
Really, really congratulation on your purchase. Maybe it's a state-of-art of filters.
I think you'll never mount on the C11: you'd have to put an ERF before the correction plate, reducing resolution and just to have no enhancement than your actual setup.
you got a....
Solar Spectrum....
0.3 Angstrom?
You rock!!!
I was astonishing over this image.
It shows many phenomena to me.
I would like to understand them with all of you
I touched Alexandra's image, hope this not disturb you, Montana.
The reached resolution shows us very delicate and definited soft arches from a filament to another one.
That's amazing...
Really, really congratulation on your purchase. Maybe it's a state-of-art of filters.
I think you'll never mount on the C11: you'd have to put an ERF before the correction plate, reducing resolution and just to have no enhancement than your actual setup.
White light: Skywatcher 120 ED and Borg 76 ED with Baader Herschel Wedge and filters
H-alpha: Lunt LS50T Ha BF600, 120 ED modified by Lunt etalon. Thousand Oaks 0.9 Å Prominance filter
Calcium II K: Lunt B1200
www.volpetta.com
We are curious. We need equipment, we need seeing, we need time
H-alpha: Lunt LS50T Ha BF600, 120 ED modified by Lunt etalon. Thousand Oaks 0.9 Å Prominance filter
Calcium II K: Lunt B1200
www.volpetta.com
We are curious. We need equipment, we need seeing, we need time
- Rusted
- Way More Fun to Share It!!
- Posts: 1738
- Joined: Fri Jan 19, 2018 11:00 am
- Location: Central Denmark
- Has thanked: 8016 times
- Been thanked: 1938 times
- Contact:
Re: First Light - Solar Spectrum 0.3A
Somebody clever should design a Serrurier truss to support these very long filter stacks.
A few carbon poles strapped around the OTA might work. Though not ideal from a geometrical standpoint.
It isn't so simple to support such a cantilevered assembly on an equatorial due to OTA rotation.
On an altaz a single, carbon pole, of ample girth, would probably have worked.
A few carbon poles strapped around the OTA might work. Though not ideal from a geometrical standpoint.
It isn't so simple to support such a cantilevered assembly on an equatorial due to OTA rotation.
On an altaz a single, carbon pole, of ample girth, would probably have worked.
http://fullerscopes.blogspot.dk/
H-alpha: Baader 160mm D-ERF, iStar 150/10 H-alpha objective, 2" Baader 35nm H-a, 2" Beloptik KG3,
Lunt 60MT etalon, Lunt B1200S2 BF, Assorted T-S GPCs or 2x "Shorty" Barlow, ZWO ASI174.
H-alpha: Baader 160mm D-ERF, iStar 150/10 H-alpha objective, 2" Baader 35nm H-a, 2" Beloptik KG3,
Lunt 60MT etalon, Lunt B1200S2 BF, Assorted T-S GPCs or 2x "Shorty" Barlow, ZWO ASI174.
- banjo
- Way More Fun to Share It!!
- Posts: 1465
- Joined: Sat Sep 17, 2016 12:38 pm
- Location: France
- Has thanked: 2090 times
- Been thanked: 2859 times
Re: First Light - Solar Spectrum 0.3A
bresser/messier 150/1200 (or 200/1800 Istar ) Mod -D-Erf 160mm intern-glasspath 1.25-etalon Pst barlow X2 ASI174
https://astropol.pagesperso-orange.fr/b ... 9/best2019
sorry for my English translators google
https://astropol.pagesperso-orange.fr/b ... 9/best2019
sorry for my English translators google
-
- Way More Fun to Share It!!
- Posts: 2150
- Joined: Sun Jun 14, 2015 4:46 pm
- Location: France
- Has thanked: 1 time
- Been thanked: 2713 times
- Contact:
Re: First Light - Solar Spectrum 0.3A
Excellent !!
Christian Viladrich
Co-author of "Planetary Astronomy"
http://planetary-astronomy.com/
Editor of "Solar Astronomy"
http://www.astronomiesolaire.com/
Co-author of "Planetary Astronomy"
http://planetary-astronomy.com/
Editor of "Solar Astronomy"
http://www.astronomiesolaire.com/
- Montana
- Librarian
- Posts: 34563
- Joined: Mon Oct 17, 2011 5:25 pm
- Location: Cheshire, UK
- Has thanked: 17672 times
- Been thanked: 8793 times
Re: First Light - Solar Spectrum 0.3A
Thanks everyone for all the fabulous comments I have really enjoyed myself this weekend.
So to the comments
I can't raise the height of the tripod because any higher and I would need step ladders to mount the telescope, I'm a bit short
Yes, the tubes are very long and even though they are all screwed together or click locked there is still some sag. This is evident in that my centre-line is at 23.5 degrees and not 27 degrees as it should be. Some carbon fibre re-enforcement would be great, Rusted, you are very welcome to build some
Davide, the filament annotation is excellent, it is great to study these regions. Filaments form over a line of neutral magnetic field so it would be sensible that they should form a line and perhaps interconnect. I like what you did and I shall keep that for my records
Thanks a lot guys, stay safe and hope you have a sunny week.
Alexandra
So to the comments
I can't raise the height of the tripod because any higher and I would need step ladders to mount the telescope, I'm a bit short
Yes, the tubes are very long and even though they are all screwed together or click locked there is still some sag. This is evident in that my centre-line is at 23.5 degrees and not 27 degrees as it should be. Some carbon fibre re-enforcement would be great, Rusted, you are very welcome to build some
Davide, the filament annotation is excellent, it is great to study these regions. Filaments form over a line of neutral magnetic field so it would be sensible that they should form a line and perhaps interconnect. I like what you did and I shall keep that for my records
Thanks a lot guys, stay safe and hope you have a sunny week.
Alexandra
- p_zetner
- Way More Fun to Share It!!
- Posts: 1644
- Joined: Sun Mar 18, 2012 4:59 pm
- Location: Winnipeg, Manitoba, Canada
- Has thanked: 166 times
- Been thanked: 719 times
Re: First Light - Solar Spectrum 0.3A
Beautiful results, Alexandra.
Congratulations on spectacular success with your new filter.
Cheers.
Peter
Congratulations on spectacular success with your new filter.
Cheers.
Peter
-
- Oh, I get it now!
- Posts: 46
- Joined: Mon Mar 23, 2020 3:39 am
- Has thanked: 52 times
- Been thanked: 28 times
Re: First Light - Solar Spectrum 0.3A
Alexandra,
Your report is fantastic. I have a RG18 0.3A on order. Do you remember the temperature outside when you imaging? Just curious.
PS I have zoomed many times looking at your imaging train on this setup and read a lot on what I will need for my 135mm scope. Very helpful you have done this for all to see. Thank you!
Graham
Last edited by Grakrob778 on Mon Jul 19, 2021 5:51 am, edited 1 time in total.
Lunt 80Tha B1800, Lunt Ca2K B1200, Solar Spectrum RG18 0.3A, Skywatcher EvoStar 150, ASI 1600MM & 174MM
-
- Im an EXPERT!
- Posts: 429
- Joined: Sun Mar 08, 2020 9:25 pm
- Location: Austin Texas
- Has thanked: 146 times
- Been thanked: 277 times
Re: First Light - Solar Spectrum 0.3A
Congratulations Alexandra.
I’m looking foreword to some beautiful images.
I have been using the 18mm version, and am absolutely enchanted. I also have had some issues with sag in the train. For me, I it is evident in part of the image plane being off band. You can test it by standing a few meters back and looking at your objective lens. You will see a small red dot that should be centered. I had to measure and make an X with thin masking tape at the center of my lens. I’ve been trying to dream up some kind of adjustable rail support for the whole rig after the focuser.
Are your test images stacks or single frames ? Did you process them in a batch?
I’m looking foreword to some beautiful images.
I have been using the 18mm version, and am absolutely enchanted. I also have had some issues with sag in the train. For me, I it is evident in part of the image plane being off band. You can test it by standing a few meters back and looking at your objective lens. You will see a small red dot that should be centered. I had to measure and make an X with thin masking tape at the center of my lens. I’ve been trying to dream up some kind of adjustable rail support for the whole rig after the focuser.
Are your test images stacks or single frames ? Did you process them in a batch?
- Montana
- Librarian
- Posts: 34563
- Joined: Mon Oct 17, 2011 5:25 pm
- Location: Cheshire, UK
- Has thanked: 17672 times
- Been thanked: 8793 times
Re: First Light - Solar Spectrum 0.3A
Thanks guys
Graham, The outside temperature was around 22 degrees on average. I think it started at 19 and maybe got up to 24 degrees (very hot!)
David, If you think of something do let me know The test frames are the best 5% of 1000 frames stacked. I then batch processed in the same way. Remember, don't do a flat, you want to see the changes in band.
Alexandra
Graham, The outside temperature was around 22 degrees on average. I think it started at 19 and maybe got up to 24 degrees (very hot!)
David, If you think of something do let me know The test frames are the best 5% of 1000 frames stacked. I then batch processed in the same way. Remember, don't do a flat, you want to see the changes in band.
Alexandra
- marktownley
- Librarian
- Posts: 42274
- Joined: Tue Oct 18, 2011 5:27 pm
- Location: Brierley Hills, UK
- Has thanked: 20442 times
- Been thanked: 10248 times
- Contact:
Re: First Light - Solar Spectrum 0.3A
These are absolutely stunning! This sums up so well why the SS is so much better than a Quark! Very impressed indeed!
http://brierleyhillsolar.blogspot.co.uk/
Solar images, a collection of all the most up to date live solar data on the web, imaging & processing tutorials - please take a look!
- cmas
- Ohhhhhh My!
- Posts: 144
- Joined: Sat May 06, 2017 5:49 pm
- Has thanked: 294 times
- Been thanked: 248 times
Re: First Light - Solar Spectrum 0.3A
Well, I'd be angry if that setup would be on the Quark level That is some really serious imaging train, looks like an RPG in a good way The images are superb and I am super envious of that setup!
Let's hope clear skies as I bet these images will continue to amaze me
Let's hope clear skies as I bet these images will continue to amaze me
H-alpha: Baader D-ERF, Sharpstar 61 EDPH II, Altair Astro 102 f/7, Quark, reducer and ASI174mm.
White light: Baader ASSF 115, Sony SEL 200600G, Sony SEL20TC, Sony A7iii.
Images in AstroBin
Images in Flickr
White light: Baader ASSF 115, Sony SEL 200600G, Sony SEL20TC, Sony A7iii.
Images in AstroBin
Images in Flickr
- MapleRidge
- Way More Fun to Share It!!
- Posts: 10199
- Joined: Fri Jan 13, 2012 11:58 pm
- Location: Cambray, ON Canada
- Has thanked: 64 times
- Been thanked: 4340 times
- Contact:
Re: First Light - Solar Spectrum 0.3A
Hi Alexandra...
Congrats on the new Ha filter and it is producing very sharp images for you
I know you have been waiting a long time to get the resolution and band-pass to this level on the TEC, and I'm sure the C11 will work well too. I agree the long assembly of filters/tubes/camera off the rear of the scope makes for some sag..hope you can engineer a way to minimize it.
Brian
Congrats on the new Ha filter and it is producing very sharp images for you
I know you have been waiting a long time to get the resolution and band-pass to this level on the TEC, and I'm sure the C11 will work well too. I agree the long assembly of filters/tubes/camera off the rear of the scope makes for some sag..hope you can engineer a way to minimize it.
Brian
Brian Colville
Maple Ridge Observatory
Cambray, ON Canada
Photos: https://www.flickr.com/photos/185395281@N08/albums
10'x15 Roll-off Roof Observatory
Takahashi EM400 Mount carrying:
C14 + Lunt 80ED
Deep Sky Work - ASI294MM Pro+EFW 7x36/Canon 60D (Ha mod), ONAG
Planetary Work - SBIG CFW10, ASI462MM
2.2m Diameter Dome
iOptron CEM70G Mount carrying:
Orion EON 130ED, f7 OTA for Day & Night Use
Ha Setup: Lunt LS80PT/LS75FHa/B1200Ha + Home Brew Lunt Double Stack/B1800Ha on the Orion OTA + Daystar Quantum
WL, G-Band & CaK Setup: Lunt Wedge & Lunt B1800CaK, Baader K-Line and Altair 2nm G-Band filter
ASI1600MM, ASI432MM, ASI294MM Pro, ASI174MM, ASI462MM
Maple Ridge Observatory
Cambray, ON Canada
Photos: https://www.flickr.com/photos/185395281@N08/albums
10'x15 Roll-off Roof Observatory
Takahashi EM400 Mount carrying:
C14 + Lunt 80ED
Deep Sky Work - ASI294MM Pro+EFW 7x36/Canon 60D (Ha mod), ONAG
Planetary Work - SBIG CFW10, ASI462MM
2.2m Diameter Dome
iOptron CEM70G Mount carrying:
Orion EON 130ED, f7 OTA for Day & Night Use
Ha Setup: Lunt LS80PT/LS75FHa/B1200Ha + Home Brew Lunt Double Stack/B1800Ha on the Orion OTA + Daystar Quantum
WL, G-Band & CaK Setup: Lunt Wedge & Lunt B1800CaK, Baader K-Line and Altair 2nm G-Band filter
ASI1600MM, ASI432MM, ASI294MM Pro, ASI174MM, ASI462MM
- cmas
- Ohhhhhh My!
- Posts: 144
- Joined: Sat May 06, 2017 5:49 pm
- Has thanked: 294 times
- Been thanked: 248 times
Re: First Light - Solar Spectrum 0.3A
Just a thought: Are those extensions all T2? Swapping those to larger ones like m68 (and adapt the SS and telecentric/barlow to that) should increase rigidity. And if T2 is needed, I'd ask someone to make custom T2-extensions which have the required length (and maybe made with a slightly thicker Al tube and/or with higher quality aluminium or weld additional Al support structures to the tubes making the extensions more rigid) as when you have so many separate threaded connections, slight errors multiply over such a long distance and you have unwanted sag.
H-alpha: Baader D-ERF, Sharpstar 61 EDPH II, Altair Astro 102 f/7, Quark, reducer and ASI174mm.
White light: Baader ASSF 115, Sony SEL 200600G, Sony SEL20TC, Sony A7iii.
Images in AstroBin
Images in Flickr
White light: Baader ASSF 115, Sony SEL 200600G, Sony SEL20TC, Sony A7iii.
Images in AstroBin
Images in Flickr
- eroel
- Way More Fun to Share It!!
- Posts: 9408
- Joined: Mon Dec 19, 2011 10:45 pm
- Location: México D.F.
- Been thanked: 4904 times
Re: First Light - Solar Spectrum 0.3A
Alexandra:
Superb instrument and superb images.
I dream with a 0.3Aº Ha filter, my old ATM is just an 0.45Aº.
Best wishes.
Eric.
Superb instrument and superb images.
I dream with a 0.3Aº Ha filter, my old ATM is just an 0.45Aº.
Best wishes.
Eric.
-
- Im an EXPERT!
- Posts: 385
- Joined: Sun Oct 29, 2017 9:51 pm
- Has thanked: 286 times
- Been thanked: 399 times
Re: First Light - Solar Spectrum 0.3A
Hi Alexandra
The Great Fraunhofer refractor used two adjustable brass weights at one end of long bars with the bars centre on a gimbal mount to stop the wooden tube sagging under the weight of the objective, something similar in reverse would work.
I'm afraid you do need two of them to work properly on a EQ mount over a large area of movement.
The only other way is brute force like Stu has done on his RC.
Rod
The Great Fraunhofer refractor used two adjustable brass weights at one end of long bars with the bars centre on a gimbal mount to stop the wooden tube sagging under the weight of the objective, something similar in reverse would work.
I'm afraid you do need two of them to work properly on a EQ mount over a large area of movement.
The only other way is brute force like Stu has done on his RC.
Rod
- Attachments
-
- Fraunhofe.jpg (55.53 KiB) Viewed 716 times
- Rusted
- Way More Fun to Share It!!
- Posts: 1738
- Joined: Fri Jan 19, 2018 11:00 am
- Location: Central Denmark
- Has thanked: 8016 times
- Been thanked: 1938 times
- Contact:
Re: First Light - Solar Spectrum 0.3A
The difficulty with improving the stiffness of such a long assembly is the need for access to the vital bits in between the focuser and the camera.
A large disk [or a square plate] at the focuser end could support CF tubes.
Parallel tubes and baffles would be easier to use.
This would certainly support the load but who wants to volunteer to drill fixing holes in the TEC 140?
A thin, support plate could be sandwiched between the focuser and main tube?
I really wouldn't start from here. I'd start from scratch and build a new, full length, but much wider skeleton tube OTA.
With baffles at useful intervals to match the threaded adapter needs of the vital components.
Then bung the TEC objective cell on the front and you're golden.
A large disk [or a square plate] at the focuser end could support CF tubes.
Parallel tubes and baffles would be easier to use.
This would certainly support the load but who wants to volunteer to drill fixing holes in the TEC 140?
A thin, support plate could be sandwiched between the focuser and main tube?
I really wouldn't start from here. I'd start from scratch and build a new, full length, but much wider skeleton tube OTA.
With baffles at useful intervals to match the threaded adapter needs of the vital components.
Then bung the TEC objective cell on the front and you're golden.
http://fullerscopes.blogspot.dk/
H-alpha: Baader 160mm D-ERF, iStar 150/10 H-alpha objective, 2" Baader 35nm H-a, 2" Beloptik KG3,
Lunt 60MT etalon, Lunt B1200S2 BF, Assorted T-S GPCs or 2x "Shorty" Barlow, ZWO ASI174.
H-alpha: Baader 160mm D-ERF, iStar 150/10 H-alpha objective, 2" Baader 35nm H-a, 2" Beloptik KG3,
Lunt 60MT etalon, Lunt B1200S2 BF, Assorted T-S GPCs or 2x "Shorty" Barlow, ZWO ASI174.
- Lagonda
- Ohhhhhh My!
- Posts: 51
- Joined: Wed Jul 21, 2021 11:05 am
- Location: Zagreb, Croatia
- Has thanked: 57 times
- Been thanked: 168 times
Re: First Light - Solar Spectrum 0.3A
Nice setup. I have a few questions. Did you have any reason to put TZ lens without M68 compendium to connect SS and TEC? When you look at the proms visually, how do you see it? Are they visible enough (maybe some comparison to 0.5A filter?) and is the image overall dim or bright? I am interested in buying 0.3A filter but it is very difficult to look through it because it is not a thing that everybody have.
What was the problem with focus? I think TEC has enough focus to reach for TZ and SS setup directly to its focuser.
I wish you many many sunny days and excellent seeing conditions.
Alan
What was the problem with focus? I think TEC has enough focus to reach for TZ and SS setup directly to its focuser.
I wish you many many sunny days and excellent seeing conditions.
Alan
- Montana
- Librarian
- Posts: 34563
- Joined: Mon Oct 17, 2011 5:25 pm
- Location: Cheshire, UK
- Has thanked: 17672 times
- Been thanked: 8793 times
Re: First Light - Solar Spectrum 0.3A
Hi Alan,
Did you have any reason to put TZ lens without M68 compendium to connect SS and TEC?
Absolutely no idea, I had to look up what this was
When you look at the proms visually, how do you see it?
I've not looked visually yet so I have no idea
Are they visible enough (maybe some comparison to 0.5A filter?) and is the image overall dim or bright?
I've never used a 0.5A one, but this 0.3A is amazing, the image is very bright, I needed 51ms exposure for this prominence shown here but it was a very faint prom. I could see brighter proms on the edge without even taking the camera off the settings needed for the surface (less than 10ms). I would probably say it was brighter than my Solarscope.
What was the problem with focus? I think TEC has enough focus to reach for TZ and SS setup directly to its focuser.
I couldn't achieve focus as I ran out of extension with the focuser, so I added a 50mm extension tube and then I was able to focus fine
I hope these answer your questions, apart from the ones I'm afraid I don't know
Kind regards
Alexandra
Did you have any reason to put TZ lens without M68 compendium to connect SS and TEC?
Absolutely no idea, I had to look up what this was
When you look at the proms visually, how do you see it?
I've not looked visually yet so I have no idea
Are they visible enough (maybe some comparison to 0.5A filter?) and is the image overall dim or bright?
I've never used a 0.5A one, but this 0.3A is amazing, the image is very bright, I needed 51ms exposure for this prominence shown here but it was a very faint prom. I could see brighter proms on the edge without even taking the camera off the settings needed for the surface (less than 10ms). I would probably say it was brighter than my Solarscope.
What was the problem with focus? I think TEC has enough focus to reach for TZ and SS setup directly to its focuser.
I couldn't achieve focus as I ran out of extension with the focuser, so I added a 50mm extension tube and then I was able to focus fine
I hope these answer your questions, apart from the ones I'm afraid I don't know
Kind regards
Alexandra
- Bob Yoesle
- Almost There...
- Posts: 994
- Joined: Thu Mar 08, 2012 7:24 pm
- Has thanked: 540 times
- Been thanked: 807 times
Re: First Light - Solar Spectrum 0.3A
Wonderful images Alexandria!
Just some caveats after long conversations with Mark at Solar Spectrum. A smaller diameter filter is better for achieving good contrast uniformity - keep it real for the image scale and EFL you're going to use.
Per Mark, and as well described in Christian's posts, you won't realistically reach a FWHM for a so-specified filter unless you're at a really long focal ratio, and at f25 there's little difference 0.5 and 0.3 A FWHM. This is especially true with single stacked filters where FWHM is less important than the transmission tails - and this is better with higher finesse (first caveat above - aka filter uniformity). And as discussed, it also takes near absolute perfect alignment of the optical axis. For these systems and long EFR's you'd have to use a sturdy optical rail type system as rusted describes to achieve the needed accuracy.
Just some caveats after long conversations with Mark at Solar Spectrum. A smaller diameter filter is better for achieving good contrast uniformity - keep it real for the image scale and EFL you're going to use.
The old 0.45 ATM is likely very good. I regret that I ever sold my 1976 Del Woods 0.7 ATM. The quality of the mica back then was generally better as well.I dream with a 0.3Aº Ha filter, my old ATM is just an 0.45Aº.
Per Mark, and as well described in Christian's posts, you won't realistically reach a FWHM for a so-specified filter unless you're at a really long focal ratio, and at f25 there's little difference 0.5 and 0.3 A FWHM. This is especially true with single stacked filters where FWHM is less important than the transmission tails - and this is better with higher finesse (first caveat above - aka filter uniformity). And as discussed, it also takes near absolute perfect alignment of the optical axis. For these systems and long EFR's you'd have to use a sturdy optical rail type system as rusted describes to achieve the needed accuracy.
Diagonally parked in a parallel universe.
Curiosity is the father of knowledge; uncertainty is the mother of wisdom.
Dark-Sky Defenders
Goldendale Observatory
Curiosity is the father of knowledge; uncertainty is the mother of wisdom.
Dark-Sky Defenders
Goldendale Observatory
- VasilevIvan
- Im an EXPERT!
- Posts: 228
- Joined: Wed Apr 07, 2021 7:46 pm
- Has thanked: 397 times
- Been thanked: 264 times
Re: First Light - Solar Spectrum 0.3A
Congratulations, Alexandra with a perfect device!
Very interesting report and absolutely stunning images!
Have you tried to capture full disk with SS filter?
BR, Ivan.
Very interesting report and absolutely stunning images!
Have you tried to capture full disk with SS filter?
BR, Ivan.
Best regards, Ivan.
VANTIM. Two Brothers observatory.
Observatory Dome 2.85m
SolarMax II 60mm DS, SW MAK 150, SW 80 ED, TS-Optics 6'' f5,9, LightBridge 12'' // AZ-EQ6 Pro, HEQ-5 mount
DayStar Quark Chromosphere, Lunt CaK B1800, D-ERF Baader 6'' // ZWO ASI 174mm, ASI 183mm, ASI178mm, ASI462mc, Player-One Apollo-M MAX.
VANTIM. Two Brothers observatory.
Observatory Dome 2.85m
SolarMax II 60mm DS, SW MAK 150, SW 80 ED, TS-Optics 6'' f5,9, LightBridge 12'' // AZ-EQ6 Pro, HEQ-5 mount
DayStar Quark Chromosphere, Lunt CaK B1800, D-ERF Baader 6'' // ZWO ASI 174mm, ASI 183mm, ASI178mm, ASI462mc, Player-One Apollo-M MAX.
- Lagonda
- Ohhhhhh My!
- Posts: 51
- Joined: Wed Jul 21, 2021 11:05 am
- Location: Zagreb, Croatia
- Has thanked: 57 times
- Been thanked: 168 times
Re: First Light - Solar Spectrum 0.3A
Montana wrote: ↑Thu Jul 22, 2021 5:02 pm Hi Alan,
Did you have any reason to put TZ lens without M68 compendium to connect SS and TEC?
Absolutely no idea, I had to look up what this was
M68 is a thread like M42, M48, T2 etc. Baader has combination for TZ systems if you want to put on your scope (with M68 on the rear side)-M68 compendium (inside you screw TZ lens in) and you put the rest as you wish. That M68 Compendium is some sort of tube where you screw TZ lens in and it looks more sturdy than just fitting TZ lens alone. But it doesn't have to be the case. Look at Baader website for that.
When you look at the proms visually, how do you see it?
I've not looked visually yet so I have no idea
Ok. You will. You have time. I know that capturing Sun is very tempting.
Are they visible enough (maybe some comparison to 0.5A filter?) and is the image overall dim or bright?
I've never used a 0.5A one, but this 0.3A is amazing, the image is very bright, I needed 51ms exposure for this prominence shown here but it was a very faint prom. I could see brighter proms on the edge without even taking the camera off the settings needed for the surface (less than 10ms). I would probably say it was brighter than my Solarscope.
I found out that on 0.5A I can see proms better and some surface details than with a camera. Although I can record some frames with only one exposure and I can get surface and proms in post processing. That is why I asked about visual observing. Because I saw some impressive images with 0.3A.
I hope these answer your questions, apart from the ones I'm afraid I don't know
Yes you did. Thank you.
Clear skies
Alan
- Jordan Konisky
- Im an EXPERT!
- Posts: 356
- Joined: Thu Apr 18, 2019 12:08 am
- Location: Verona, Wisconsin
- Has thanked: 386 times
- Been thanked: 270 times
Re: First Light - Solar Spectrum 0.3A
Alexandra,
Took my breadth away. Congratulations.
Jordan
Took my breadth away. Congratulations.
Jordan
Jordan -
SkyWatcher ED100 Refractor with Diamond Steeltrack Crawford Focuser
Celestron CG4 Equatorial Mount
Daystar Quark H-Alpha Chromosphere
Lunt CaK B1800 Filter Module
Lunt White Light Solar Wedge
ZWO ASI174MM, ZWOASI1600MM Cameras
SkyWatcher ED100 Refractor with Diamond Steeltrack Crawford Focuser
Celestron CG4 Equatorial Mount
Daystar Quark H-Alpha Chromosphere
Lunt CaK B1800 Filter Module
Lunt White Light Solar Wedge
ZWO ASI174MM, ZWOASI1600MM Cameras
- MapleRidge
- Way More Fun to Share It!!
- Posts: 10199
- Joined: Fri Jan 13, 2012 11:58 pm
- Location: Cambray, ON Canada
- Has thanked: 64 times
- Been thanked: 4340 times
- Contact:
Re: First Light - Solar Spectrum 0.3A
Alan...
Regarding the visual brightness, I find my 0.45A Quantum is a difficult view unless you can keep your head covered and all the stray light out. I did view through a 0.3A filter at NEAF many years ago and found it equally challenging, but not bad if you can keep your head covered. It will vary on your eyes and eyepiece quality too.
A friend has a 0.5A Quantum and it has to be one of the brightest views I've seem, but it was newly returned from Daystar for having its blockers/trimmers serviced.
Brian
Regarding the visual brightness, I find my 0.45A Quantum is a difficult view unless you can keep your head covered and all the stray light out. I did view through a 0.3A filter at NEAF many years ago and found it equally challenging, but not bad if you can keep your head covered. It will vary on your eyes and eyepiece quality too.
A friend has a 0.5A Quantum and it has to be one of the brightest views I've seem, but it was newly returned from Daystar for having its blockers/trimmers serviced.
Brian
Brian Colville
Maple Ridge Observatory
Cambray, ON Canada
Photos: https://www.flickr.com/photos/185395281@N08/albums
10'x15 Roll-off Roof Observatory
Takahashi EM400 Mount carrying:
C14 + Lunt 80ED
Deep Sky Work - ASI294MM Pro+EFW 7x36/Canon 60D (Ha mod), ONAG
Planetary Work - SBIG CFW10, ASI462MM
2.2m Diameter Dome
iOptron CEM70G Mount carrying:
Orion EON 130ED, f7 OTA for Day & Night Use
Ha Setup: Lunt LS80PT/LS75FHa/B1200Ha + Home Brew Lunt Double Stack/B1800Ha on the Orion OTA + Daystar Quantum
WL, G-Band & CaK Setup: Lunt Wedge & Lunt B1800CaK, Baader K-Line and Altair 2nm G-Band filter
ASI1600MM, ASI432MM, ASI294MM Pro, ASI174MM, ASI462MM
Maple Ridge Observatory
Cambray, ON Canada
Photos: https://www.flickr.com/photos/185395281@N08/albums
10'x15 Roll-off Roof Observatory
Takahashi EM400 Mount carrying:
C14 + Lunt 80ED
Deep Sky Work - ASI294MM Pro+EFW 7x36/Canon 60D (Ha mod), ONAG
Planetary Work - SBIG CFW10, ASI462MM
2.2m Diameter Dome
iOptron CEM70G Mount carrying:
Orion EON 130ED, f7 OTA for Day & Night Use
Ha Setup: Lunt LS80PT/LS75FHa/B1200Ha + Home Brew Lunt Double Stack/B1800Ha on the Orion OTA + Daystar Quantum
WL, G-Band & CaK Setup: Lunt Wedge & Lunt B1800CaK, Baader K-Line and Altair 2nm G-Band filter
ASI1600MM, ASI432MM, ASI294MM Pro, ASI174MM, ASI462MM
- MAURITS
- Way More Fun to Share It!!
- Posts: 8507
- Joined: Tue Nov 27, 2018 4:37 pm
- Location: Belgium
- Has thanked: 2412 times
- Been thanked: 4787 times
- Contact:
Re: First Light - Solar Spectrum 0.3A
Alexander, I see that the Tec 140 APO has an f/7 , so with the TZ4 telecentric you have than f/28.
I tought you need absolutely f/30 for Ha imaging with the Solar Spectrum 0.3Å to have the better results.
Do I have it wrong?
I tought you need absolutely f/30 for Ha imaging with the Solar Spectrum 0.3Å to have the better results.
Do I have it wrong?
- Valery
- Way More Fun to Share It!!
- Posts: 4059
- Joined: Sun Nov 18, 2012 3:13 pm
- Has thanked: 156 times
- Been thanked: 893 times
Re: First Light - Solar Spectrum 0.3A
Eric,
PM sent.
Valery
"Solar H alpha activity is the most dynamic and compelling thing you can see in a telescope, so spend accordingly." (c) Bob Yoesle.
Largest full size 185 - 356mm Dielectric Energy Rejection Filters (D-ERF) by ARIES Instruments.
Largest full size 185 - 356mm Dielectric Energy Rejection Filters (D-ERF) by ARIES Instruments.
- Montana
- Librarian
- Posts: 34563
- Joined: Mon Oct 17, 2011 5:25 pm
- Location: Cheshire, UK
- Has thanked: 17672 times
- Been thanked: 8793 times
Re: First Light - Solar Spectrum 0.3A
Maurits,
The TEC140 maybe 140mm but the ERF I have is Baader D-ERF 135mm which only has effectively 125mm being in the filter cell. So (980/125)*4 = f31.36
Alexandra
The TEC140 maybe 140mm but the ERF I have is Baader D-ERF 135mm which only has effectively 125mm being in the filter cell. So (980/125)*4 = f31.36
Alexandra
- MAURITS
- Way More Fun to Share It!!
- Posts: 8507
- Joined: Tue Nov 27, 2018 4:37 pm
- Location: Belgium
- Has thanked: 2412 times
- Been thanked: 4787 times
- Contact:
Re: First Light - Solar Spectrum 0.3A
Ah I didn't seen that, indeed f/31.36
Thanks for the clarification