Magnetometer Project

I LOVE finding out about different ways to appreciate the Sun and light in general. Use this forum to post your info or questions about various outside the mainstream ways to appreciate our life giving star!
Wah
Im an EXPERT!
Im an EXPERT!
Posts: 373
Joined: Tue May 01, 2012 2:14 am
Has thanked: 8 times
Been thanked: 17 times

Re: Magnetometer Project

Post by Wah »

A swimming pool should have lots of heat capacity, you may put it under water~


User avatar
swisswalter
Way More Fun to Share It!!
Way More Fun to Share It!!
Posts: 17948
Joined: Thu Feb 06, 2014 4:28 am
Location: Switzerland
Been thanked: 1 time
Contact:

Re: Magnetometer Project

Post by swisswalter »

Hi Mike

I'm so sad to read about the death rattle of the fridge :cry:

Some of the best insulation material is aerogel, it may be worthwhile to try it


Only stardust in the wind, some fine and some less fine scopes, filters and adapters as well. Switzerland 47 N, 9 E, in the heart of EUROPE :)

from 7 am - 7 pm http://www.nanosys.ch

from 7.01 pm - 6.59 am http://www.wastronomiko.com some times vice versa ;)
User avatar
grimble_cornet
Way More Fun to Share It!!
Way More Fun to Share It!!
Posts: 3537
Joined: Tue Jul 10, 2012 5:10 pm
Location: UK West Midlands
Been thanked: 47 times

Re: Magnetometer Project

Post by grimble_cornet »

Interesting idea Wah :bow2

.....and water would certainly 'damp-down' the thermal oscillations BUT I think I have enough problems at the moment without introducing 'water + electronics = BANG' into the equation :oops:

Thanks for the aerogel suggestion Walter.
It does look like a possible solution. The 5mm blanket is not too expensive and is available in small quantities via the internet.

At the moment the cool box is wrapped, rather inelegantly, in a duvet and the temperature does seem quite stable with no significant change as the ambient temperature rises and falls by 6-8 degrees.
Heat mat plus duvet.jpg
Heat mat plus duvet.jpg (278.29 KiB) Viewed 5392 times
However, the trace does still seem to be drifting upwards - the basic frequency from the Bat detector has climbed steadily by about 50Hz since the temperature stabilised last night. This upward drift changes the overall shape of the trace when compared to the Intermagnet data although the individual 'micro-magnetic-events' are still captured.
Stuart has stressed several times that it does take a significant amount of time for things to settle down so........ think I will just leave it for a couple of days and see what happens before I explore a slightly more 'elegant' thermal insulation solution :lol: :P :lol:


.

.



.


Mike Garbett

Selection of Solar and Deep Sky images on Flickr: https://www.flickr.com/photos/mikegarbett/
User avatar
swisswalter
Way More Fun to Share It!!
Way More Fun to Share It!!
Posts: 17948
Joined: Thu Feb 06, 2014 4:28 am
Location: Switzerland
Been thanked: 1 time
Contact:

Re: Magnetometer Project

Post by swisswalter »

Yes Mike

you are on a state of the project where you have to take your time. No rapid changes anymore (maybe a beer more ;) )


Only stardust in the wind, some fine and some less fine scopes, filters and adapters as well. Switzerland 47 N, 9 E, in the heart of EUROPE :)

from 7 am - 7 pm http://www.nanosys.ch

from 7.01 pm - 6.59 am http://www.wastronomiko.com some times vice versa ;)
User avatar
grimble_cornet
Way More Fun to Share It!!
Way More Fun to Share It!!
Posts: 3537
Joined: Tue Jul 10, 2012 5:10 pm
Location: UK West Midlands
Been thanked: 47 times

Re: Magnetometer Project

Post by grimble_cornet »

Beer always helps - and now I can get it from the fridge without fear of disturbing the Bats :lol:


.

.



.


Mike Garbett

Selection of Solar and Deep Sky images on Flickr: https://www.flickr.com/photos/mikegarbett/
User avatar
grimble_cornet
Way More Fun to Share It!!
Way More Fun to Share It!!
Posts: 3537
Joined: Tue Jul 10, 2012 5:10 pm
Location: UK West Midlands
Been thanked: 47 times

Re: Magnetometer Project

Post by grimble_cornet »

Well this is interesting.................

After transferring the Bat detector from 8 degrees C in the fridge to 27 degrees C in the heated cool box I expected it to take some time to settle down but this is getting silly :o
4 days.jpg
During the first few hours the output of the Bat detector increased from about 2700Hz to about 3300Hz before is started to flatten out. So far, so good - this is exactly what has happened before :)

However, the increase continued over the next 12 hours although at a slower rate. As the temperature was still changing a little too much for comfort, I wrapped the cool box in a duvet and found that the heat mat and pulse thermostat was able to maintain the temperature within less than half a degree. This now pretty much matches Stuart's set up so surely the trace will now settle down :?:

Nope :evil:

After 60 hours of very well controlled temperatures - the frequency is still climbing at about 150Hz per day with no sign of it stopping or even slowing down :shock:
It is now at about 3760Hz - over 1000Hz higher than when it was in the fridge with nothing having changed other than the temperature of the Bat detector.

The good news is that it is picking up very small changes in the Earth's magnetic field and - if we ignore the relentless uphill climb - matches Intermagnet data very well.
Heat mat plus duvet.jpg
Heat mat plus duvet.jpg (278.29 KiB) Viewed 5363 times
The latest 24 hour record looks like this:
29th Jan 2015.jpg
29th Jan 2015.jpg (268.58 KiB) Viewed 5363 times
I'm a bit baffled now and not sure what to do next :?: :roll: :?:
I have cracked the temperature stability issue (albeit in a rather inelegant way via the duvet wrap) but can't work out why the frequency is still rising?
One part of me wants to just leave it and see just how high it will go...........
Another part wants to get in there and re-tune the Bat detector to bring the base frequency back down to 2800Hz or so and see if it will stabilise there.

Decisions, decisions....................

Good job that I enjoy a challenge :lol: :? :lol: :roll: :lol:


.

.



.


Mike Garbett

Selection of Solar and Deep Sky images on Flickr: https://www.flickr.com/photos/mikegarbett/
User avatar
Carbon60
Way More Fun to Share It!!
Way More Fun to Share It!!
Posts: 14209
Joined: Wed Mar 07, 2012 12:33 pm
Location: Lancashire, UK
Has thanked: 8418 times
Been thanked: 8162 times

Re: Magnetometer Project

Post by Carbon60 »

Hi Mike,

I would just leave it to settle down. It will eventually peak. Don't forget that the thermometer will be reading slightly differently to the true temperature of the detector (i.e. it is not actually sitting inside the plastic housing and measuring the temperature of the circuit board). I agree that after 60hrs it should be stable, but let's see how far up the scale it goes. There's still a lot of headroom on the spectrum ;)

Be aware that if it drifts too much then you will have to re-set the measurement frequency range selected for data acquisition.

Cheers

Stu


H-alpha, WL and Ca II K imaging kit for various image scales.
Fluxgate Magnetometers (1s and 150s Cadence).
Radio meteor detector.
More images at http://www.flickr.com/photos/solarcarbon60/
User avatar
Montana
Librarian
Librarian
Posts: 34563
Joined: Mon Oct 17, 2011 5:25 pm
Location: Cheshire, UK
Has thanked: 17672 times
Been thanked: 8791 times

Re: Magnetometer Project

Post by Montana »

8 degrees to 27 degrees is quite a jump, especially when just 0.5 degree makes so much difference, it might take a while :)

Great data though :hamster:

Alexandra


User avatar
grimble_cornet
Way More Fun to Share It!!
Way More Fun to Share It!!
Posts: 3537
Joined: Tue Jul 10, 2012 5:10 pm
Location: UK West Midlands
Been thanked: 47 times

Re: Magnetometer Project

Post by grimble_cornet »

Thanks folks, I think you are right and I will just see what happens :roll:

I agree Alexandra that the data is pretty impressive - better than I would have dared to expect from a 'hobby electronics project' :beanie:

It is the need to re-set the frequency selection which makes me want to 'fiddle' but I'll let it settle first.

One question Stuart - the tone coming from the Bat detector seems very 'rough' with lots of quite harsh 'noise' rather than the fairly pure tone I would expect.
I could be wrong, but I think a lot of the 'noise' started when I moved over to a fairly simple 5v power supply (I think it powered a usb hub originally)?
Spectrum Lab seems to be coping with it and is able to identify the 'peak frequency' so, doesn't seem to be preventing me from picking up detailed data which matches Intermagnet data very well but I wondered if you got a 'cleaner' response by using the regulated supply shared with the FGM-3?


.

.



.


Mike Garbett

Selection of Solar and Deep Sky images on Flickr: https://www.flickr.com/photos/mikegarbett/
User avatar
Carbon60
Way More Fun to Share It!!
Way More Fun to Share It!!
Posts: 14209
Joined: Wed Mar 07, 2012 12:33 pm
Location: Lancashire, UK
Has thanked: 8418 times
Been thanked: 8162 times

Re: Magnetometer Project

Post by Carbon60 »

Hi Mike,

It sounds like the issue is going to be the power supply. Probably best to use something stable and regulated to avoid noise.

Cheers.

Stu.


H-alpha, WL and Ca II K imaging kit for various image scales.
Fluxgate Magnetometers (1s and 150s Cadence).
Radio meteor detector.
More images at http://www.flickr.com/photos/solarcarbon60/
User avatar
grimble_cornet
Way More Fun to Share It!!
Way More Fun to Share It!!
Posts: 3537
Joined: Tue Jul 10, 2012 5:10 pm
Location: UK West Midlands
Been thanked: 47 times

Re: Magnetometer Project

Post by grimble_cornet »

Thought it was flattening out last night but no........ still rising slowly!

It did pick up a minor 'event' very well yesterday evening though so I'm not going to change anything for a while :seesaw

The duvet seems to be working as the heat-mat plus pulse thermostat is now keeping the Bat detector stable to within about 0.3 degrees C :D
30th January 2015.jpg
30th January 2015.jpg (280.76 KiB) Viewed 5323 times


.

.



.


Mike Garbett

Selection of Solar and Deep Sky images on Flickr: https://www.flickr.com/photos/mikegarbett/
User avatar
Montana
Librarian
Librarian
Posts: 34563
Joined: Mon Oct 17, 2011 5:25 pm
Location: Cheshire, UK
Has thanked: 17672 times
Been thanked: 8791 times

Re: Magnetometer Project

Post by Montana »

Nice peak :hamster:

Alexandra


User avatar
marktownley
Librarian
Librarian
Posts: 42272
Joined: Tue Oct 18, 2011 5:27 pm
Location: Brierley Hills, UK
Has thanked: 20435 times
Been thanked: 10245 times
Contact:

Re: Magnetometer Project

Post by marktownley »

Just thinking here, the circuit will naturally generate 'some' (small amount) heat by the nature it is turned on, if it is wrapped in the duvet all that heat will be trapped and the temperature will rise, gradually. maybe?


Image
http://brierleyhillsolar.blogspot.co.uk/
Solar images, a collection of all the most up to date live solar data on the web, imaging & processing tutorials - please take a look!
User avatar
grimble_cornet
Way More Fun to Share It!!
Way More Fun to Share It!!
Posts: 3537
Joined: Tue Jul 10, 2012 5:10 pm
Location: UK West Midlands
Been thanked: 47 times

Re: Magnetometer Project

Post by grimble_cornet »

Mmmmm. I had considered that but the box, inside the duvet, is thermostatically controlled with the heater running at 0-100% as required. Once the heating mat is switched off by the thermostat, the temperature in the box drops quite quickly before the heating is switched on again. The temperature probe is inside the foam shell surrounding the Bat detector so is measuring the temperature within about 2cm of the circuit board and remains stready to within 0.3 degrees.
Weird :shock:

5 days and counting...............
5 days.jpg
5 days.jpg (225.48 KiB) Viewed 5316 times


.

.



.


Mike Garbett

Selection of Solar and Deep Sky images on Flickr: https://www.flickr.com/photos/mikegarbett/
User avatar
Carbon60
Way More Fun to Share It!!
Way More Fun to Share It!!
Posts: 14209
Joined: Wed Mar 07, 2012 12:33 pm
Location: Lancashire, UK
Has thanked: 8418 times
Been thanked: 8162 times

Re: Magnetometer Project

Post by Carbon60 »

Hi Mike,

How's the voltage? If the temperature is stable, then the other variable is voltage (both on the sensor and the magenta 5).

Mark's correct about internal heating from the bat detector, but as you say, this should have stabilised by now, which brings us back to voltage. There's no substitute for a good electrical supply!

Stu.


H-alpha, WL and Ca II K imaging kit for various image scales.
Fluxgate Magnetometers (1s and 150s Cadence).
Radio meteor detector.
More images at http://www.flickr.com/photos/solarcarbon60/
User avatar
grimble_cornet
Way More Fun to Share It!!
Way More Fun to Share It!!
Posts: 3537
Joined: Tue Jul 10, 2012 5:10 pm
Location: UK West Midlands
Been thanked: 47 times

Re: Magnetometer Project

Post by grimble_cornet »

That's an interesting point Stu :?: :idea: :?:

The sensor is powered from a 12v supply dropped to 5v and stabilised via the circuit you show in your project guide :D

The Bat 5 - as I said before - uses an old 5v hub power supply which I could replace by tapping another feed from the 12v supply - I have the components but didn't bother when the hub supply seemed to be working :oops:

I agree that the Bat 5 supply is the weakest link and it probably makes sense to upgrade BUT...... when the temperature was stable in the fridge, it was giving an almost perfect match to Intermagnet :roll:

Maybe things are different at 27 degrees?

Anyway, it seems to be almost flat now so I'll leave it for another 24 hours before considering a power supply upgrade, insulation tidy and Bat 5 re-tune.
31st January 2015.jpg


.

.



.


Mike Garbett

Selection of Solar and Deep Sky images on Flickr: https://www.flickr.com/photos/mikegarbett/
User avatar
swisswalter
Way More Fun to Share It!!
Way More Fun to Share It!!
Posts: 17948
Joined: Thu Feb 06, 2014 4:28 am
Location: Switzerland
Been thanked: 1 time
Contact:

Re: Magnetometer Project

Post by swisswalter »

Hi Mike

+/- 0.2 °C is very good. can you really do better ?


Only stardust in the wind, some fine and some less fine scopes, filters and adapters as well. Switzerland 47 N, 9 E, in the heart of EUROPE :)

from 7 am - 7 pm http://www.nanosys.ch

from 7.01 pm - 6.59 am http://www.wastronomiko.com some times vice versa ;)
User avatar
marktownley
Librarian
Librarian
Posts: 42272
Joined: Tue Oct 18, 2011 5:27 pm
Location: Brierley Hills, UK
Has thanked: 20435 times
Been thanked: 10245 times
Contact:

Re: Magnetometer Project

Post by marktownley »

Are you using a 'wall wart' style power supply?


Image
http://brierleyhillsolar.blogspot.co.uk/
Solar images, a collection of all the most up to date live solar data on the web, imaging & processing tutorials - please take a look!
User avatar
Carbon60
Way More Fun to Share It!!
Way More Fun to Share It!!
Posts: 14209
Joined: Wed Mar 07, 2012 12:33 pm
Location: Lancashire, UK
Has thanked: 8418 times
Been thanked: 8162 times

Re: Magnetometer Project

Post by Carbon60 »

Hi Mike,

For reference, my data over the same period.
Coronal hole 20150131.jpg
Coronal hole 20150131.jpg (98.08 KiB) Viewed 5289 times
Stu.


H-alpha, WL and Ca II K imaging kit for various image scales.
Fluxgate Magnetometers (1s and 150s Cadence).
Radio meteor detector.
More images at http://www.flickr.com/photos/solarcarbon60/
User avatar
swisswalter
Way More Fun to Share It!!
Way More Fun to Share It!!
Posts: 17948
Joined: Thu Feb 06, 2014 4:28 am
Location: Switzerland
Been thanked: 1 time
Contact:

Re: Magnetometer Project

Post by swisswalter »

Hi Mike and Stuart


wonderful, you both are almost twins, to be identical twins however, there has to go more work into the Project ;)


Only stardust in the wind, some fine and some less fine scopes, filters and adapters as well. Switzerland 47 N, 9 E, in the heart of EUROPE :)

from 7 am - 7 pm http://www.nanosys.ch

from 7.01 pm - 6.59 am http://www.wastronomiko.com some times vice versa ;)
User avatar
grimble_cornet
Way More Fun to Share It!!
Way More Fun to Share It!!
Posts: 3537
Joined: Tue Jul 10, 2012 5:10 pm
Location: UK West Midlands
Been thanked: 47 times

Re: Magnetometer Project

Post by grimble_cornet »

Walter: no I don't think I can improve the temperature control. I would like to 'tidy up' the insulation by replacing the duvet with something more appropriate - maybe the aerogel you suggested?
Mark: yep, its a plug/transformer combo type. I know it's noisy and I can just tap into the supply to the sensor but I'm not convinced that it is the problem as I can get almost perfect data for hours at a time?
Stuart: thanks for the comparison:
31st January 2015 comparisons.jpg
31st January 2015 comparisons.jpg (259.48 KiB) Viewed 5275 times
Looking at the last 12-24 hours, it seems that the difference between my data and that from Intermagnet is little more than the difference between individual magnetometers contributing to Intermagnet :roll:


I might strip it down and take the opportunity to re-tune the Bat 5 tomorrow ;)


.

.



.


Mike Garbett

Selection of Solar and Deep Sky images on Flickr: https://www.flickr.com/photos/mikegarbett/
User avatar
swisswalter
Way More Fun to Share It!!
Way More Fun to Share It!!
Posts: 17948
Joined: Thu Feb 06, 2014 4:28 am
Location: Switzerland
Been thanked: 1 time
Contact:

Re: Magnetometer Project

Post by swisswalter »

Hi Mike

great results, fantastic results. BTW, don't you have to correct for the location on earth ?


Only stardust in the wind, some fine and some less fine scopes, filters and adapters as well. Switzerland 47 N, 9 E, in the heart of EUROPE :)

from 7 am - 7 pm http://www.nanosys.ch

from 7.01 pm - 6.59 am http://www.wastronomiko.com some times vice versa ;)
User avatar
grimble_cornet
Way More Fun to Share It!!
Way More Fun to Share It!!
Posts: 3537
Joined: Tue Jul 10, 2012 5:10 pm
Location: UK West Midlands
Been thanked: 47 times

Re: Magnetometer Project

Post by grimble_cornet »

Perfectly correct Walter - I have been looking at a range of magnetometers in 'Mid-latitude Europe'.

Anyway - very happy with today's trace which finished with a nice 80 nT peak which matches very well the data from the Intermagnet site :seesaw
February 1st 2015.jpg
February 1st 2015.jpg (310.59 KiB) Viewed 5265 times

:movie Don't think I can ask for much more than that :movie


.

.



.


Mike Garbett

Selection of Solar and Deep Sky images on Flickr: https://www.flickr.com/photos/mikegarbett/
User avatar
swisswalter
Way More Fun to Share It!!
Way More Fun to Share It!!
Posts: 17948
Joined: Thu Feb 06, 2014 4:28 am
Location: Switzerland
Been thanked: 1 time
Contact:

Re: Magnetometer Project

Post by swisswalter »

Hi Mike

what a fine catch, great match, congratulations


Only stardust in the wind, some fine and some less fine scopes, filters and adapters as well. Switzerland 47 N, 9 E, in the heart of EUROPE :)

from 7 am - 7 pm http://www.nanosys.ch

from 7.01 pm - 6.59 am http://www.wastronomiko.com some times vice versa ;)
User avatar
Carbon60
Way More Fun to Share It!!
Way More Fun to Share It!!
Posts: 14209
Joined: Wed Mar 07, 2012 12:33 pm
Location: Lancashire, UK
Has thanked: 8418 times
Been thanked: 8162 times

Re: Magnetometer Project

Post by Carbon60 »

Hi Mike,

I think we can conclude that 'SolarChat' magnetometers 1 and 2 are up and running well!

We just need a few more dotted around the globe to have a network :D


For anyone else on this forum, if you've read this far then you must have an interest in this sort of thing. As you can see, Mike has set up a fully functional magnetometer using little more than a FGM-3 sensor, an ultrasonic emitter, a bat detector and a lap-top. Key to this project is having a location that is free from magnetic disturbances, a good stable power supply (with some basic home electronics required) and excellent thermal management. There can be some challenges in all these things, but as Mike has shown, persistence wins and with some basic equipment suitable temperature stability can be achieved. I think the total cost is in the region of £250-£300, including sensor, detector and heater/thermostat.

I'd encourage anyone who can meet the 'free from magnetic disturbances' criteria to have a go. More details on how to construct this device can be found in the tutorial section.

Good luck.

Stu.


H-alpha, WL and Ca II K imaging kit for various image scales.
Fluxgate Magnetometers (1s and 150s Cadence).
Radio meteor detector.
More images at http://www.flickr.com/photos/solarcarbon60/
solarscope180
The Sun?
The Sun?
Posts: 16
Joined: Sat Feb 15, 2014 2:36 am

Re: Magnetometer Project

Post by solarscope180 »

How far do you need the magnetometer to be from buried electrical lines to achieve acceptable results?

Ralph


User avatar
swisswalter
Way More Fun to Share It!!
Way More Fun to Share It!!
Posts: 17948
Joined: Thu Feb 06, 2014 4:28 am
Location: Switzerland
Been thanked: 1 time
Contact:

Re: Magnetometer Project

Post by swisswalter »

Hi Stuart

as soon as I have reached the status "retired" I'm after it ;)


Only stardust in the wind, some fine and some less fine scopes, filters and adapters as well. Switzerland 47 N, 9 E, in the heart of EUROPE :)

from 7 am - 7 pm http://www.nanosys.ch

from 7.01 pm - 6.59 am http://www.wastronomiko.com some times vice versa ;)
User avatar
grimble_cornet
Way More Fun to Share It!!
Way More Fun to Share It!!
Posts: 3537
Joined: Tue Jul 10, 2012 5:10 pm
Location: UK West Midlands
Been thanked: 47 times

Re: Magnetometer Project

Post by grimble_cornet »

After a mere 8 days.............. the trace seems to have stabilised at about 4000Hz having started at about 3400Hz when the temperature was fully controlled:
8 days.jpg


Yesterday's trace was pretty good with no obvious sign of 'upwards creep'
Feb 3rd 2015.jpg
Feb 3rd 2015.jpg (234.53 KiB) Viewed 5286 times


.

.



.


Mike Garbett

Selection of Solar and Deep Sky images on Flickr: https://www.flickr.com/photos/mikegarbett/
User avatar
Carbon60
Way More Fun to Share It!!
Way More Fun to Share It!!
Posts: 14209
Joined: Wed Mar 07, 2012 12:33 pm
Location: Lancashire, UK
Has thanked: 8418 times
Been thanked: 8162 times

Re: Magnetometer Project

Post by Carbon60 »

Looking very good there, Mike.

Stu.


H-alpha, WL and Ca II K imaging kit for various image scales.
Fluxgate Magnetometers (1s and 150s Cadence).
Radio meteor detector.
More images at http://www.flickr.com/photos/solarcarbon60/
User avatar
Carbon60
Way More Fun to Share It!!
Way More Fun to Share It!!
Posts: 14209
Joined: Wed Mar 07, 2012 12:33 pm
Location: Lancashire, UK
Has thanked: 8418 times
Been thanked: 8162 times

Re: Magnetometer Project

Post by Carbon60 »

solarscope180 wrote:How far do you need the magnetometer to be from buried electrical lines to achieve acceptable results?

Ralph
Hi Ralph,

It will depend on the current flowing through them as this will drive the local magnetic field. My magnetometer is about 5m from my house and it doesn't appear to be affected by normal domestic power systems. I wouldn't like to second guess your situation. I would just suggest that the further away the better.

Regards

Stuart


H-alpha, WL and Ca II K imaging kit for various image scales.
Fluxgate Magnetometers (1s and 150s Cadence).
Radio meteor detector.
More images at http://www.flickr.com/photos/solarcarbon60/
User avatar
grimble_cornet
Way More Fun to Share It!!
Way More Fun to Share It!!
Posts: 3537
Joined: Tue Jul 10, 2012 5:10 pm
Location: UK West Midlands
Been thanked: 47 times

Re: Magnetometer Project

Post by grimble_cornet »

Mine is buried about 7m from the house but only about 2m from the power distribution box for my observatory. I have spent a couple of 3-4 hour sessions in the observatory drawing power for mount, computer and a 400W heater with no obvious deviation on the magnetometer trace.
However, as far away as possible makes sense!


.

.



.


Mike Garbett

Selection of Solar and Deep Sky images on Flickr: https://www.flickr.com/photos/mikegarbett/
User avatar
swisswalter
Way More Fun to Share It!!
Way More Fun to Share It!!
Posts: 17948
Joined: Thu Feb 06, 2014 4:28 am
Location: Switzerland
Been thanked: 1 time
Contact:

Re: Magnetometer Project

Post by swisswalter »

Hi Mike

that really looks very good, congratulations


Only stardust in the wind, some fine and some less fine scopes, filters and adapters as well. Switzerland 47 N, 9 E, in the heart of EUROPE :)

from 7 am - 7 pm http://www.nanosys.ch

from 7.01 pm - 6.59 am http://www.wastronomiko.com some times vice versa ;)
User avatar
marktownley
Librarian
Librarian
Posts: 42272
Joined: Tue Oct 18, 2011 5:27 pm
Location: Brierley Hills, UK
Has thanked: 20435 times
Been thanked: 10245 times
Contact:

Re: Magnetometer Project

Post by marktownley »

Really looking the business now Mike!


Image
http://brierleyhillsolar.blogspot.co.uk/
Solar images, a collection of all the most up to date live solar data on the web, imaging & processing tutorials - please take a look!
User avatar
grimble_cornet
Way More Fun to Share It!!
Way More Fun to Share It!!
Posts: 3537
Joined: Tue Jul 10, 2012 5:10 pm
Location: UK West Midlands
Been thanked: 47 times

Re: Magnetometer Project

Post by grimble_cornet »

Thanks guys.
I'm glad I gave it time to settle down but still baffled why it took 8 days!
Fairly happy with the results at the moment as it seems to capture all the 'significant' events - just waiting for a BIG one now.......


.

.



.


Mike Garbett

Selection of Solar and Deep Sky images on Flickr: https://www.flickr.com/photos/mikegarbett/
User avatar
grimble_cornet
Way More Fun to Share It!!
Way More Fun to Share It!!
Posts: 3537
Joined: Tue Jul 10, 2012 5:10 pm
Location: UK West Midlands
Been thanked: 47 times

Re: Magnetometer Project

Post by grimble_cornet »

Latest update..................
Things seem to have stabilised nicely over the last few weeks and I am now getting data which compares rather well with published results.

The last couple of days have been quite active with swings of 60 to -60 nT
17-18th February 2015.jpg
One interesting point - look at 10am on the 17th and you will see a (relatively) big dip in temperature caused by me leaving the patio doors open for about 20 minutes while I was setting up my imaging gear on the patio. Shows just how easy it is to de-stabilise the system (even in a thermostatically controlled box) and, even though it didn't seem to distort the magnetic data too much, a small drop in the output can be easily mapped to the 0.4 degree drop in temperature :roll:


.

.



.


Mike Garbett

Selection of Solar and Deep Sky images on Flickr: https://www.flickr.com/photos/mikegarbett/
User avatar
Montana
Librarian
Librarian
Posts: 34563
Joined: Mon Oct 17, 2011 5:25 pm
Location: Cheshire, UK
Has thanked: 17672 times
Been thanked: 8791 times

Re: Magnetometer Project

Post by Montana »

:bow :bow :bow that's coming along nicely :) I take it that the top one is yours?

Alexandra


User avatar
grimble_cornet
Way More Fun to Share It!!
Way More Fun to Share It!!
Posts: 3537
Joined: Tue Jul 10, 2012 5:10 pm
Location: UK West Midlands
Been thanked: 47 times

Re: Magnetometer Project

Post by grimble_cornet »

That is correct Alexandra.
I must say that I'm very surprised how my £200 'lash-up' performs so well in comparison with professional stations which I assume have somewhat larger budgets :lol: :o :lol:


.

.



.


Mike Garbett

Selection of Solar and Deep Sky images on Flickr: https://www.flickr.com/photos/mikegarbett/
Wah
Im an EXPERT!
Im an EXPERT!
Posts: 373
Joined: Tue May 01, 2012 2:14 am
Has thanked: 8 times
Been thanked: 17 times

Re: Magnetometer Project

Post by Wah »

:bow :bow :bow


User avatar
swisswalter
Way More Fun to Share It!!
Way More Fun to Share It!!
Posts: 17948
Joined: Thu Feb 06, 2014 4:28 am
Location: Switzerland
Been thanked: 1 time
Contact:

Re: Magnetometer Project

Post by swisswalter »

Hi Mike

a perfect match, incredibly sensitiv to small temperature changes


Only stardust in the wind, some fine and some less fine scopes, filters and adapters as well. Switzerland 47 N, 9 E, in the heart of EUROPE :)

from 7 am - 7 pm http://www.nanosys.ch

from 7.01 pm - 6.59 am http://www.wastronomiko.com some times vice versa ;)
User avatar
marktownley
Librarian
Librarian
Posts: 42272
Joined: Tue Oct 18, 2011 5:27 pm
Location: Brierley Hills, UK
Has thanked: 20435 times
Been thanked: 10245 times
Contact:

Re: Magnetometer Project

Post by marktownley »

Excellent results! Very thermally dependable...


Image
http://brierleyhillsolar.blogspot.co.uk/
Solar images, a collection of all the most up to date live solar data on the web, imaging & processing tutorials - please take a look!
User avatar
Carbon60
Way More Fun to Share It!!
Way More Fun to Share It!!
Posts: 14209
Joined: Wed Mar 07, 2012 12:33 pm
Location: Lancashire, UK
Has thanked: 8418 times
Been thanked: 8162 times

Re: Magnetometer Project

Post by Carbon60 »

Nice one, Mike.

I had some issues this week with a water leak in the garage :o and had to use a heater to help dry things out. Needless to say, the temperature change sent my data haywire for a period. Back to normal now....thankfully.

Stu.


H-alpha, WL and Ca II K imaging kit for various image scales.
Fluxgate Magnetometers (1s and 150s Cadence).
Radio meteor detector.
More images at http://www.flickr.com/photos/solarcarbon60/
User avatar
marktownley
Librarian
Librarian
Posts: 42272
Joined: Tue Oct 18, 2011 5:27 pm
Location: Brierley Hills, UK
Has thanked: 20435 times
Been thanked: 10245 times
Contact:

Re: Magnetometer Project

Post by marktownley »

The next step forward for this project is advanced elements of thermal stabilty...

Sounds like it should have been a textbook I read for my A-levels...


Image
http://brierleyhillsolar.blogspot.co.uk/
Solar images, a collection of all the most up to date live solar data on the web, imaging & processing tutorials - please take a look!
Post Reply