Hi all I would be interested in what folks think of these readings. At the moment I'm getting a dip every day from 18:00 which peaks at 00:00 then dips again at 06:00. This seems to be a daily occurrence over the last three days.
I can't work out why it is so regular if it's temperature issues. Any ideas?
I have attached a screenshot.
Thanks Carl
Magnetometer drift?
-
- Oh, I get it now!
- Posts: 43
- Joined: Sat Oct 29, 2016 6:38 pm
- Location: Antrim
- Montana
- Librarian
- Posts: 34722
- Joined: Mon Oct 17, 2011 5:25 pm
- Location: Cheshire, UK
- Has thanked: 17974 times
- Been thanked: 8907 times
-
- Oh, I get it now!
- Posts: 43
- Joined: Sat Oct 29, 2016 6:38 pm
- Location: Antrim
Re: Magnetometer drift?
Hi yes thought that maybe the case but the timings are out I also turned off the heat in that room. The readings last night exactly the same. I'm baffled as it can't be outside temperature even as its like clockwork no matter if it's warm or cold.
Thanks Carl
Thanks Carl
- Montana
- Librarian
- Posts: 34722
- Joined: Mon Oct 17, 2011 5:25 pm
- Location: Cheshire, UK
- Has thanked: 17974 times
- Been thanked: 8907 times
Re: Magnetometer drift?
I think Mike G eventually settled on it being the central heating but it was a delayed reaction. I think he eventually ended with it in an insulated flask. Ideally I think it should be in a large deep hole in the garden soil. I am sure the boys will know exactly what it is.
Alexandra
Alexandra
-
- Oh, I get it now!
- Posts: 43
- Joined: Sat Oct 29, 2016 6:38 pm
- Location: Antrim
Re: Magnetometer drift?
Thanks I hope so. I should give a basic run down of my setup.
The sensor is about a meter underground fed with outside phone cable which is buried a few inches for most of the run.
The bat detector is sitting on the desk perhaps it needs to be totally insulated? Any ideas welcomed.
Regards Carl
The sensor is about a meter underground fed with outside phone cable which is buried a few inches for most of the run.
The bat detector is sitting on the desk perhaps it needs to be totally insulated? Any ideas welcomed.
Regards Carl
- Carbon60
- Way More Fun to Share It!!
- Posts: 14316
- Joined: Wed Mar 07, 2012 12:33 pm
- Location: Lancashire, UK
- Has thanked: 8559 times
- Been thanked: 8297 times
Re: Magnetometer drift?
Hi Carl,
I would say it's most likely a temperature issue, although it's odd that it's 'like a clock' and you've changed the temperature in the room. Take a look at the latest tutorial which explains how I encased the bat detector in a thermos flask, inside a 'cool box' with a thermostatically controlled heater mat (as for a terrarium). This is what it takes to maintain temperature. I was surprised at how sensitive the system is to temperature changes. I'm sure that this can be nulled using a formula that relates temperature to the readout, but I never got around to doing this.
If it isn't temperature, then it could be some type of voltage issue. I assume that you're feeding the FGM and Bat detector with very steady voltages.
Stu.
I would say it's most likely a temperature issue, although it's odd that it's 'like a clock' and you've changed the temperature in the room. Take a look at the latest tutorial which explains how I encased the bat detector in a thermos flask, inside a 'cool box' with a thermostatically controlled heater mat (as for a terrarium). This is what it takes to maintain temperature. I was surprised at how sensitive the system is to temperature changes. I'm sure that this can be nulled using a formula that relates temperature to the readout, but I never got around to doing this.
If it isn't temperature, then it could be some type of voltage issue. I assume that you're feeding the FGM and Bat detector with very steady voltages.
Stu.
Last edited by Carbon60 on Fri Nov 04, 2016 6:02 pm, edited 1 time in total.
H-alpha, WL and Ca II K imaging kit for various image scales.
Fluxgate Magnetometers (1s and 150s Cadence).
Radio meteor detector.
More images at http://www.flickr.com/photos/solarcarbon60/
Fluxgate Magnetometers (1s and 150s Cadence).
Radio meteor detector.
More images at http://www.flickr.com/photos/solarcarbon60/
- Carbon60
- Way More Fun to Share It!!
- Posts: 14316
- Joined: Wed Mar 07, 2012 12:33 pm
- Location: Lancashire, UK
- Has thanked: 8559 times
- Been thanked: 8297 times
Re: Magnetometer drift?
Carl,
Some images that might help......
Deconstructed bat detector mounted on a wooden board Detector housed in thermos flask Thermostatically controlled heater mat Cool box with thermostatic controller mounted and set (to 27 deg C) All a bit of a faff, but it works and is needed to keep the detector at a reasonably steady temperature.
Voltage regulation is also critical, as I've mentioned. I feed both sensor and detector with stabilised voltages to avoid any drift.
Stu.
Some images that might help......
Deconstructed bat detector mounted on a wooden board Detector housed in thermos flask Thermostatically controlled heater mat Cool box with thermostatic controller mounted and set (to 27 deg C) All a bit of a faff, but it works and is needed to keep the detector at a reasonably steady temperature.
Voltage regulation is also critical, as I've mentioned. I feed both sensor and detector with stabilised voltages to avoid any drift.
Stu.
H-alpha, WL and Ca II K imaging kit for various image scales.
Fluxgate Magnetometers (1s and 150s Cadence).
Radio meteor detector.
More images at http://www.flickr.com/photos/solarcarbon60/
Fluxgate Magnetometers (1s and 150s Cadence).
Radio meteor detector.
More images at http://www.flickr.com/photos/solarcarbon60/
-
- Oh, I get it now!
- Posts: 43
- Joined: Sat Oct 29, 2016 6:38 pm
- Location: Antrim
Re: Magnetometer drift?
Wow may need to upgrade! yes I have built the double regulated supply running off a regulated supply. The bat has no temperature control at all so maybe the culprit. Thanks for taking the time to help out.
Regards Carl
Regards Carl