Hi everyone...
A question for the modders in the group.
What success would I have if a PST etalon mod was fitted to a SCT scope (f10 Meade ACF) using a full aperture ERF? My larger aperture project has been impacted by poor seeing and the need to run f30 with the Daystar Quantum has not allowed a lot of productive time.
My hope would be to allow images to be taken at prime focus, with ah larger FOV and shorter exposures than the Daystar requires when seeing doesn't justify the long focal length set-up. I realize that there will be a 'sweet spot', but if enough to do some wider field images around the active regions or proms it might be a worth while addition.
I'm only asking to avoid buying a PST and finding out it was a wasted effort.
My other option is to move to a smaller OTA with the daystar in an effort that seeing affects it less...but again, need to spend more money
If you have any thoughts or experiences I would appreciate hearing from you.
Thanks,
Brian
PST Mod on a SCT
- MapleRidge
- Way More Fun to Share It!!
- Posts: 10257
- Joined: Fri Jan 13, 2012 11:58 pm
- Location: Cambray, ON Canada
- Has thanked: 64 times
- Been thanked: 4428 times
- Contact:
PST Mod on a SCT
Brian Colville
Maple Ridge Observatory
Cambray, ON Canada
Photos: https://www.flickr.com/photos/185395281@N08/albums
10'x15 Roll-off Roof Observatory
Takahashi EM400 Mount carrying:
C14 + Lunt 80ED
Deep Sky Work - ASI294MM Pro+EFW 7x36/Canon 60D (Ha mod), ONAG
Planetary Work - SBIG CFW10, ASI462MM
2.2m Diameter Dome
iOptron CEM70G Mount carrying:
Orion EON 130ED, f7 OTA for Day & Night Use
Ha Setup: Lunt LS80PT/LS75FHa/B1200Ha + Home Brew Lunt Double Stack/B1800Ha on the Orion OTA + Daystar Quantum
WL, G-Band & CaK Setup: Lunt Wedge & Lunt B1800CaK, Baader K-Line and Altair 2nm G-Band filter
ASI1600MM, ASI432MM, ASI294MM Pro, ASI174MM, ASI462MM
Maple Ridge Observatory
Cambray, ON Canada
Photos: https://www.flickr.com/photos/185395281@N08/albums
10'x15 Roll-off Roof Observatory
Takahashi EM400 Mount carrying:
C14 + Lunt 80ED
Deep Sky Work - ASI294MM Pro+EFW 7x36/Canon 60D (Ha mod), ONAG
Planetary Work - SBIG CFW10, ASI462MM
2.2m Diameter Dome
iOptron CEM70G Mount carrying:
Orion EON 130ED, f7 OTA for Day & Night Use
Ha Setup: Lunt LS80PT/LS75FHa/B1200Ha + Home Brew Lunt Double Stack/B1800Ha on the Orion OTA + Daystar Quantum
WL, G-Band & CaK Setup: Lunt Wedge & Lunt B1800CaK, Baader K-Line and Altair 2nm G-Band filter
ASI1600MM, ASI432MM, ASI294MM Pro, ASI174MM, ASI462MM
- Merlin66
- Librarian
- Posts: 3972
- Joined: Tue Dec 13, 2011 1:23 pm
- Location: Junortoun, Australia
- Has thanked: 174 times
- Been thanked: 619 times
- Contact:
Re: PST Mod on a SCT
Brian,
Yes it can be done.
Having a full aperture ERF is a bonus few of us have.....
The "key" is to position the PST etalon at the majic -200mm inside prime focus.
Note: if you intend to re-use the PST "Black Box"- a Stage 1 Mod, then you may be a little disappointed - the standard 5mm BF will severely limit you.
A better solution would be just to re-use the PST etalon - a Stage 2 mod and invest in a larger BF say BF15.
Also, in my experience not all PST's are the same....some are good, some are bad and some are "Wow - now that's great"
A good PST result gives a good mod result.
Yes it can be done.
Having a full aperture ERF is a bonus few of us have.....
The "key" is to position the PST etalon at the majic -200mm inside prime focus.
Note: if you intend to re-use the PST "Black Box"- a Stage 1 Mod, then you may be a little disappointed - the standard 5mm BF will severely limit you.
A better solution would be just to re-use the PST etalon - a Stage 2 mod and invest in a larger BF say BF15.
Also, in my experience not all PST's are the same....some are good, some are bad and some are "Wow - now that's great"
A good PST result gives a good mod result.
"Astronomical Spectroscopy - The Final Frontier" - to boldly go where few amateurs have gone before
https://groups.io/g/astronomicalspectroscopy
http://astronomicalspectroscopy.com
"Astronomical Spectroscopy for Amateurs" and
"Imaging Sunlight - using a digital spectroheliograph" - Springer
https://groups.io/g/astronomicalspectroscopy
http://astronomicalspectroscopy.com
"Astronomical Spectroscopy for Amateurs" and
"Imaging Sunlight - using a digital spectroheliograph" - Springer
- MapleRidge
- Way More Fun to Share It!!
- Posts: 10257
- Joined: Fri Jan 13, 2012 11:58 pm
- Location: Cambray, ON Canada
- Has thanked: 64 times
- Been thanked: 4428 times
- Contact:
Re: PST Mod on a SCT
This was what I thought, but the majority of mods are on on refactors so I didn't want to make assumptions. I have a Lunt B1800 blocking filter that can be used with a stage 2. I still have some parts for an earlier start on a stage 3 mod, but dropped it when the Lunt DSII module was set up as a mod. So far, the pressure tuned lunt etalon has not been successful on the 25cm OTA.
Will have to keep an eye out for a PST.
Brian
Will have to keep an eye out for a PST.
Brian
Brian Colville
Maple Ridge Observatory
Cambray, ON Canada
Photos: https://www.flickr.com/photos/185395281@N08/albums
10'x15 Roll-off Roof Observatory
Takahashi EM400 Mount carrying:
C14 + Lunt 80ED
Deep Sky Work - ASI294MM Pro+EFW 7x36/Canon 60D (Ha mod), ONAG
Planetary Work - SBIG CFW10, ASI462MM
2.2m Diameter Dome
iOptron CEM70G Mount carrying:
Orion EON 130ED, f7 OTA for Day & Night Use
Ha Setup: Lunt LS80PT/LS75FHa/B1200Ha + Home Brew Lunt Double Stack/B1800Ha on the Orion OTA + Daystar Quantum
WL, G-Band & CaK Setup: Lunt Wedge & Lunt B1800CaK, Baader K-Line and Altair 2nm G-Band filter
ASI1600MM, ASI432MM, ASI294MM Pro, ASI174MM, ASI462MM
Maple Ridge Observatory
Cambray, ON Canada
Photos: https://www.flickr.com/photos/185395281@N08/albums
10'x15 Roll-off Roof Observatory
Takahashi EM400 Mount carrying:
C14 + Lunt 80ED
Deep Sky Work - ASI294MM Pro+EFW 7x36/Canon 60D (Ha mod), ONAG
Planetary Work - SBIG CFW10, ASI462MM
2.2m Diameter Dome
iOptron CEM70G Mount carrying:
Orion EON 130ED, f7 OTA for Day & Night Use
Ha Setup: Lunt LS80PT/LS75FHa/B1200Ha + Home Brew Lunt Double Stack/B1800Ha on the Orion OTA + Daystar Quantum
WL, G-Band & CaK Setup: Lunt Wedge & Lunt B1800CaK, Baader K-Line and Altair 2nm G-Band filter
ASI1600MM, ASI432MM, ASI294MM Pro, ASI174MM, ASI462MM
-
- Almost There...
- Posts: 636
- Joined: Mon Feb 06, 2017 9:04 pm
- Location: The Netherlands
- Been thanked: 1 time
Re: PST Mod on a SCT
Hi Brian, I thought that the problem to use the etalon at minus 20 cm is the lack of backfocus with the Meade or Celestron SCT's.
The Intes Alter Mak's have a backfocus of approximately 25 cm. So with such a scope it should be possible. Can 't you use a focal reducer after the Daystar to get a bigger fov?
Bart.
The Intes Alter Mak's have a backfocus of approximately 25 cm. So with such a scope it should be possible. Can 't you use a focal reducer after the Daystar to get a bigger fov?
Bart.
- marktownley
- Librarian
- Posts: 42550
- Joined: Tue Oct 18, 2011 5:27 pm
- Location: Brierley Hills, UK
- Has thanked: 20819 times
- Been thanked: 10489 times
- Contact:
Re: PST Mod on a SCT
Should work in theory. it's what Valery does.
http://brierleyhillsolar.blogspot.co.uk/
Solar images, a collection of all the most up to date live solar data on the web, imaging & processing tutorials - please take a look!