Hi!
I tried to get out of the diagonal the adapter holding the last filter (~Etalon).
I removed the hex screws on both sides (they are put back on the here picture, sorry).
Then I tried to get out this adapter, but it doesn't come out (It doesn't move at all...).
Has anyone removed it?
Is it glued?
I see on this adapter: three holes of ~2mm in diameter, located 120°.
One is marked with the arrow.
Do you have any idea for their use?
CS
Alex
Lunt CaK Mod - Removing Etalon's adapter
-
- Almost There...
- Posts: 521
- Joined: Sun Mar 22, 2015 7:48 pm
- Has thanked: 714 times
- Been thanked: 496 times
Re: Lunt CaK Mod - Removing Etalon's adapter
The 3 holes (one marked by the arrow) are not deep enough to come to the delrin ring.
These holes are approx. 3mm in depth.
The holding ring is maintained by a little strap of glue or silicon.
These holes are approx. 3mm in depth.
The holding ring is maintained by a little strap of glue or silicon.
- Attachments
-
- 20180526_110928_cr-enh.jpg (129.45 KiB) Viewed 3292 times
-
- Almost There...
- Posts: 521
- Joined: Sun Mar 22, 2015 7:48 pm
- Has thanked: 714 times
- Been thanked: 496 times
Re: Lunt CaK Mod - Removing Etalon's adapter
...
I was following this post:
viewtopic.php?f=9&t=12203
and more especially this image from this post, where the part connecting to the diagonal was disassembled:
I gave a try again to remove the etalon holding adapter out of the diagonal, but it is extremely firmly fixed. It is maybe glued.
PS: I'll upload again the pictures of the former post related the to inside inspection of the filter.
CS
Alex
I was following this post:
viewtopic.php?f=9&t=12203
and more especially this image from this post, where the part connecting to the diagonal was disassembled:
I gave a try again to remove the etalon holding adapter out of the diagonal, but it is extremely firmly fixed. It is maybe glued.
PS: I'll upload again the pictures of the former post related the to inside inspection of the filter.
CS
Alex
-
- Almost There...
- Posts: 521
- Joined: Sun Mar 22, 2015 7:48 pm
- Has thanked: 714 times
- Been thanked: 496 times
Re: Lunt CaK Mod - Removing Etalon's adapter
I opened again the diagonal and had a closer look.
Indeed there are 2 white straps of something very much looking like glue.
CS
Alex
Indeed there are 2 white straps of something very much looking like glue.
CS
Alex
- Attachments
-
- 20180526_203528_cr-enh_Ar.jpg (196.85 KiB) Viewed 3289 times