I'd installed a Losmandy top rail on my HaT a few years ago now so that I can piggy back other scopes / SSM etc. However have always thought that while the handle on celestron SCTs were in the right place for carrying a scope around, it was in the wrong place for lifting it onto the mount, and I never feel comfortable once i'm hoisting the OTA above waist height. I'd looked around a few astronomy retailers for a 'handle' and was shocked at the price. A handle is still a handle whether it is for a telescope or anything else for that matter, as long as the load rating is fine all is good. Having a clear out at work and noticed a wheeled trolley unit that had collapsed and was out for the skip had a handle to move it around. Seeing it was only bolted on I rescued it with the intention of installing on said top rail. It works well, and still gives me enough space at the front of the rail for mounting options. Is in just the right spot to hold when mounting the OTA. Mr Health and Safety is happy as is the CFO.
P1000647 by Mark Townley, on Flickr
AiryLab HaT Handle Mod
- marktownley
- Librarian
- Posts: 42639
- Joined: Tue Oct 18, 2011 5:27 pm
- Location: Brierley Hills, UK
- Has thanked: 20948 times
- Been thanked: 10588 times
- Contact:
AiryLab HaT Handle Mod
http://brierleyhillsolar.blogspot.co.uk/
Solar images, a collection of all the most up to date live solar data on the web, imaging & processing tutorials - please take a look!
- MapleRidge
- Way More Fun to Share It!!
- Posts: 10265
- Joined: Fri Jan 13, 2012 11:58 pm
- Location: Cambray, ON Canada
- Has thanked: 65 times
- Been thanked: 4459 times
- Contact:
Re: AiryLab HaT Handle Mod
Hi Mark...
Great to see your re-purposed handle installed...will be a major benefit to mount/dismount the OTA
Did you bolt it directly to the top rail (hard to tell from the pic)? The commercial handles typically have the removable brackets that mate to the dovetail which is what adds so much to their price tag.
Brian
Great to see your re-purposed handle installed...will be a major benefit to mount/dismount the OTA
Did you bolt it directly to the top rail (hard to tell from the pic)? The commercial handles typically have the removable brackets that mate to the dovetail which is what adds so much to their price tag.
Brian
Brian Colville
Maple Ridge Observatory
Cambray, ON Canada
Photos: https://www.flickr.com/photos/185395281@N08/albums
10'x15 Roll-off Roof Observatory
Takahashi EM400 Mount carrying:
C14 + Lunt 80ED
Deep Sky Work - ASI294MM Pro+EFW 7x36/Canon 60D (Ha mod), ONAG
Planetary Work - SBIG CFW10, ASI462MM
2.2m Diameter Dome
iOptron CEM70G Mount carrying:
Orion EON 130ED, f7 OTA for Day & Night Use
Ha Setup: Lunt LS80PT/LS75FHa/B1200Ha + Home Brew Lunt Double Stack/B1800Ha on the Orion OTA + Daystar Quantum
WL, G-Band & CaK Setup: Lunt Wedge & Lunt B1800CaK, Baader K-Line and Altair 2nm G-Band filter
ASI1600MM, ASI432MM, ASI294MM Pro, ASI174MM, ASI462MM
Maple Ridge Observatory
Cambray, ON Canada
Photos: https://www.flickr.com/photos/185395281@N08/albums
10'x15 Roll-off Roof Observatory
Takahashi EM400 Mount carrying:
C14 + Lunt 80ED
Deep Sky Work - ASI294MM Pro+EFW 7x36/Canon 60D (Ha mod), ONAG
Planetary Work - SBIG CFW10, ASI462MM
2.2m Diameter Dome
iOptron CEM70G Mount carrying:
Orion EON 130ED, f7 OTA for Day & Night Use
Ha Setup: Lunt LS80PT/LS75FHa/B1200Ha + Home Brew Lunt Double Stack/B1800Ha on the Orion OTA + Daystar Quantum
WL, G-Band & CaK Setup: Lunt Wedge & Lunt B1800CaK, Baader K-Line and Altair 2nm G-Band filter
ASI1600MM, ASI432MM, ASI294MM Pro, ASI174MM, ASI462MM
- marktownley
- Librarian
- Posts: 42639
- Joined: Tue Oct 18, 2011 5:27 pm
- Location: Brierley Hills, UK
- Has thanked: 20948 times
- Been thanked: 10588 times
- Contact:
Re: AiryLab HaT Handle Mod
Thanks Brian.
Yes, the handle is bolted to the top rail. I had to undo the top rail from the mounting blocks, blind fix the handle with an allen bolt and nut to the top rail and then fix it all back down on the mounting blocks. I was also pleased that it all still fits in the hard carry case I have for it.
Next thing will be to replace the bottom orange rail with on that matches the top rail, but that's just me being vain about matching cosmetics and a job for the future
Mark
Yes, the handle is bolted to the top rail. I had to undo the top rail from the mounting blocks, blind fix the handle with an allen bolt and nut to the top rail and then fix it all back down on the mounting blocks. I was also pleased that it all still fits in the hard carry case I have for it.
Next thing will be to replace the bottom orange rail with on that matches the top rail, but that's just me being vain about matching cosmetics and a job for the future
Mark
http://brierleyhillsolar.blogspot.co.uk/
Solar images, a collection of all the most up to date live solar data on the web, imaging & processing tutorials - please take a look!
- Carbon60
- Way More Fun to Share It!!
- Posts: 14335
- Joined: Wed Mar 07, 2012 12:33 pm
- Location: Lancashire, UK
- Has thanked: 8588 times
- Been thanked: 8324 times
Re: AiryLab HaT Handle Mod
Looks great, Mark. A neat, practical, solution.
Stu.
Stu.
H-alpha, WL and Ca II K imaging kit for various image scales.
Fluxgate Magnetometers (1s and 150s Cadence).
Radio meteor detector.
More images at http://www.flickr.com/photos/solarcarbon60/
Fluxgate Magnetometers (1s and 150s Cadence).
Radio meteor detector.
More images at http://www.flickr.com/photos/solarcarbon60/
- marktownley
- Librarian
- Posts: 42639
- Joined: Tue Oct 18, 2011 5:27 pm
- Location: Brierley Hills, UK
- Has thanked: 20948 times
- Been thanked: 10588 times
- Contact:
Re: AiryLab HaT Handle Mod
Thanks Stu!
http://brierleyhillsolar.blogspot.co.uk/
Solar images, a collection of all the most up to date live solar data on the web, imaging & processing tutorials - please take a look!
- KMH
- Almost There...
- Posts: 1073
- Joined: Sat Feb 22, 2014 4:45 pm
- Has thanked: 663 times
- Been thanked: 783 times
Re: AiryLab HaT Handle Mod
I have to admit I coughed up the $$$ for the ADM handle for my C-11, and the possibility of a hardware store alternative didn't even occur to me. Oh well. It does make a huge difference though - much easier and more secure to carry around.
- DeepSolar64
- Way More Fun to Share It!!
- Posts: 19159
- Joined: Thu Sep 05, 2019 12:19 am
- Location: Lowndesville S.C.
- Has thanked: 17960 times
- Been thanked: 17105 times
Re: AiryLab HaT Handle Mod
Nice!
There is a handle available at Astronomics for my AT72EDII refractor. I have thought about purchasing one. If I found one elsewhere that would fit it I would certainly jump on it as you have.
James
There is a handle available at Astronomics for my AT72EDII refractor. I have thought about purchasing one. If I found one elsewhere that would fit it I would certainly jump on it as you have.
James
Lunt 8x32 SUNoculars
Orion 70mm Solar Telescope
Celestron AstroMaster Alt/Az Mount
Meade Coronado SolarMax II 60 DS
Meade Coronado SolarMax II 90 DS
Meade Coronado AZS Alt/Az Mount
Astro-Tech AT72EDII with Altair solar wedge
Celestron NexStar 102GT with Altair solar wedge
Losmandy AZ8 Alt/Az Mount
Sky-Watcher AZGTI Alt-Az GoTo mount
Cameras: ZWO ASI178MM, PGR Grasshopper, PGR Flea
Lunt, Coronado, TeleVue, Orion and Meade eyepieces
Visual Observer
" Way more fun to see it! "
Orion 70mm Solar Telescope
Celestron AstroMaster Alt/Az Mount
Meade Coronado SolarMax II 60 DS
Meade Coronado SolarMax II 90 DS
Meade Coronado AZS Alt/Az Mount
Astro-Tech AT72EDII with Altair solar wedge
Celestron NexStar 102GT with Altair solar wedge
Losmandy AZ8 Alt/Az Mount
Sky-Watcher AZGTI Alt-Az GoTo mount
Cameras: ZWO ASI178MM, PGR Grasshopper, PGR Flea
Lunt, Coronado, TeleVue, Orion and Meade eyepieces
Visual Observer
" Way more fun to see it! "
- Montana
- Librarian
- Posts: 34769
- Joined: Mon Oct 17, 2011 5:25 pm
- Location: Cheshire, UK
- Has thanked: 18105 times
- Been thanked: 8941 times
Re: AiryLab HaT Handle Mod
That is exactly what I did as soon as I bought the C11, the handle was in completely the wrong place!!! who designs these telescopes?
The handle is essential!!
Getting ready for Spring by Alexandra Hart, on Flickr
Alexandra
The handle is essential!!
Getting ready for Spring by Alexandra Hart, on Flickr
Alexandra
- MapleRidge
- Way More Fun to Share It!!
- Posts: 10265
- Joined: Fri Jan 13, 2012 11:58 pm
- Location: Cambray, ON Canada
- Has thanked: 65 times
- Been thanked: 4459 times
- Contact:
Re: AiryLab HaT Handle Mod
Alexandra...
My thinking is that the 'stock' handle is intended for being able to grab the scope and point it.. It can also to give you a hand hold if you release the axis locks and if the scope isn't balanced just tight you can keep it from swinging and causing damage.
As for a carry handle, it is not overly practical .
Brian
My thinking is that the 'stock' handle is intended for being able to grab the scope and point it.. It can also to give you a hand hold if you release the axis locks and if the scope isn't balanced just tight you can keep it from swinging and causing damage.
As for a carry handle, it is not overly practical .
Brian
Brian Colville
Maple Ridge Observatory
Cambray, ON Canada
Photos: https://www.flickr.com/photos/185395281@N08/albums
10'x15 Roll-off Roof Observatory
Takahashi EM400 Mount carrying:
C14 + Lunt 80ED
Deep Sky Work - ASI294MM Pro+EFW 7x36/Canon 60D (Ha mod), ONAG
Planetary Work - SBIG CFW10, ASI462MM
2.2m Diameter Dome
iOptron CEM70G Mount carrying:
Orion EON 130ED, f7 OTA for Day & Night Use
Ha Setup: Lunt LS80PT/LS75FHa/B1200Ha + Home Brew Lunt Double Stack/B1800Ha on the Orion OTA + Daystar Quantum
WL, G-Band & CaK Setup: Lunt Wedge & Lunt B1800CaK, Baader K-Line and Altair 2nm G-Band filter
ASI1600MM, ASI432MM, ASI294MM Pro, ASI174MM, ASI462MM
Maple Ridge Observatory
Cambray, ON Canada
Photos: https://www.flickr.com/photos/185395281@N08/albums
10'x15 Roll-off Roof Observatory
Takahashi EM400 Mount carrying:
C14 + Lunt 80ED
Deep Sky Work - ASI294MM Pro+EFW 7x36/Canon 60D (Ha mod), ONAG
Planetary Work - SBIG CFW10, ASI462MM
2.2m Diameter Dome
iOptron CEM70G Mount carrying:
Orion EON 130ED, f7 OTA for Day & Night Use
Ha Setup: Lunt LS80PT/LS75FHa/B1200Ha + Home Brew Lunt Double Stack/B1800Ha on the Orion OTA + Daystar Quantum
WL, G-Band & CaK Setup: Lunt Wedge & Lunt B1800CaK, Baader K-Line and Altair 2nm G-Band filter
ASI1600MM, ASI432MM, ASI294MM Pro, ASI174MM, ASI462MM